Titanium vs. SS valves weight...pictured...
02-05-2011, 10:45 AM
#1
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
Titanium vs. SS valves weight...pictured... The compared valves are for my ETP modified 240+ cc with the following dimension:
- Intake 2.100 x 5.450 x 5/16
- Exhaust 1.570 x 5.450 x 5/16
The weight difference is as on the pictures below:
REX SS Intake:
Xceldyne Titanium Intake:
REV SS Exhaust:
Xceldyne Titanium Exhaust:
Result:
Christian
- Intake 2.100 x 5.450 x 5/16
- Exhaust 1.570 x 5.450 x 5/16
The weight difference is as on the pictures below:
REX SS Intake:
Xceldyne Titanium Intake:
REV SS Exhaust:
Xceldyne Titanium Exhaust:
Result:
Christian
Last edited by miami993c297; 02-05-2011 at 11:58 AM.
Trending Topics
02-05-2011, 01:20 PM
#10
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
And I am not bored to listen to the same song everyday!!!!!!!!!
Christian
02-06-2011, 04:36 PM
#20
TECH Resident
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: West Palm Beach fl usa
Posts: 934
Received 0 Likes
on
0 Posts
- PSI LS 1512 ML Valve Springs
- Xceldine XRE52S Retainers
- Xceldine XLO992-C Titanium Valve Locks
- CV Products CV8050 Push Rods. 8.050 x 3/8 x 0.080
- Morel MRL 4708 Hydraulic Hi-Lift LS Roller Lifters
- GM Hydraulic Lifter Guides
- Camshaft by Ed Curtis FTI, I asked him how I wanted the engine to behave, where I wanted my power to be, he send me the Barbara Streisand Camshaft tailored for my needs...
The only way to have the cam-specs was to "cam-doctor" it...which I did but will not share by respect to Ed work.
Mainly smaller than it seems, and a lot smaller than some others around here, with not that much of lift...
Christian