Sail Hatan

I think I'll be dealing with Martin very soon. It'll be a bonus if I can get a nice lopey idle.

99Bluz28

iTrader: (35)

You'll clearly have your lopey idle, that's a fact !

Sales@Tick

iTrader: (3)

I couldn't agree more!
Whenever you'd like to talk about your set-up a little more in depth and get all the final details wrapped up just give me a call at the shop and I'll get you taken care of!

Lopey idle will not be a problem!

Sail Hatan

Awesome. Soon! How much does a custom grind run?

Sales@Tick

iTrader: (3)

399.99 is the price for a custom grind.

Sail Hatan

martin, is it possible to get a pushrod and spring combo thatll work with a custom grind all from you? id like to have everything at once.

Sales@Tick

iTrader: (3)

Of course!

We have our cam package that would instead of being the normal 679.99 for an "off the shelf grind" it would be 699.99 for a custom.

We can add a LS2 timing chain for 44.99 and a LSA oil pump for 94.99 to that also along with a gasket kit that you'd need for the swap and balancer bolt for 54.99.

Sail Hatan

Awesome, ill probably end up with all that good stuff

Sales@Tick

iTrader: (3)

The timing chain and oil pump aren't totally necessary, but it's a great idea to replace them while you're at it.

We've found the LSA oil pumps work just as well if not better than the LS6 stuff.

Sail Hatan

I had a bit of a set back, I bought a truck. But I think with my Christmas bonus ill order up the whole cam set up. So ill be calling very soon!!! 400rwhp here I come!

Sail Hatan

couple more questions! Do i need lifters/ trays? I want this to be safe, and I dont want to wipe out my motor just yet, haha.

christmas bonus is next week! cam time!

Grr

iTrader: (2)

if you are concerned just order a new set, they are under $50 for the whole set

Sail Hatan

cam has been ordered, and delivered. Its all sitting in the back of the car. Scheduled for the first week of february install. endedd up with a 231/235 .617'/.621' 111+2 cam.
also got pushrods, springs, ls6 pump, ls2 chain, gaskets, seals, under drive pulley, and the crank bolt. cant wait. shooting for 400 rwhp, and if I dont get it, next thing ordered will be a F.A.S.T. 102 set up.

Sales@Tick

iTrader: (3)

Time for a little Saturday Night Special action!

Can't wait to see your results Bryce!

Sail Hatan

Can't wait! Should be a blast when it's done.

98sickspeedblkta

Just did my headers next is cam . Cover is leaking so have to putcam in while im there.

Sail Hatan

Yea, that's a better time than any. Mine goes in either this next week or the following. I cannot wait.

DeLaRosa25

iTrader: (10)

Nice, I plan on going with a 230/236 set up for my Camaro. Hard to find sound clips for this haha.

Sales@Tick

iTrader: (3)

Bryce, you get this thing installed and tuned yet?

Sail Hatan

I wish. I think I'm dropping it off Monday. Anticipation is killing me! See how close we can get to 400rwhp.