When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Benny, yes a know value if I new your MAX RPM ? (8000 ?)
My PMG Alternator should be finished (proto) in thirty days, with "beta" units is sixty days.
That is a 12K Max RPM Armature with embedded magnets. (N-52)
The CAD will be done by Casey Wegner, a team member.
Lance
I'll be running the fast 102 at first so I'm going to say 6800-7200
Well the engine/trans are finally in. Having a slight issue with the TSP 2" headers. The passenger side is resting against the frame so going to try and pry it out some. I was also having a bad time trying to get the steering shaft lined up and back on. I'm going to start on it again and see how things go tomorrow. Anyway, here are some pics
On the passanger side header mine contacted the frame also. If its the same spot as mine and your seeing it from the top it actually just a tab extending down from the frame. I just bent the tab over on a 45 and all was good. Glad to see your still working on her.
On the passanger side header mine contacted the frame also. If its the same spot as mine and your seeing it from the top it actually just a tab extending down from the frame. I just bent the tab over on a 45 and all was good. Glad to see your still working on her.
Yeah I bent that tab over, but the header is still resting on the frame right above it. It's not bad so I should be able to pry it away a little to get the clearance I need.
Figured out most of my issues with the header and tailshaft alignment. Loosened all motor mount hardware and ratchet strapped the tailshaft over to get everything aligned where I needed it and re-torqued all hardware. Everything is lined up pretty good now.
Sucks waiting for the little stuff. You know you have to wait on the big still like motor, tranny and rear but waiting for a couple days on that one fitting you didn't order is the worst. I'm sure I'm not the only one waiting to see this thing completed.
Sucks waiting for the little stuff. You know you have to wait on the big still like motor, tranny and rear but waiting for a couple days on that one fitting you didn't order is the worst. I'm sure I'm not the only one waiting to see this thing completed.
If you put manifold on already then it can wait buy these and put in tool box when manifold is off next time. I find that the stainless steel button heads the alan key part can strip when tq is applied. I went to hardware store or Fastenal and got the grade 10.9 or 8.8 button heads they don't strip as easy.
If you put manifold on already then it can wait buy these and put in tool box when manifold is off next time. I find that the stainless steel button heads the alan key part can strip when tq is applied. I went to hardware store or Fastenal and got the grade 10.9 or 8.8 button heads they don't strip as easy.
Thanks for the insight, I will definitely keep that in mind