How I ended up routing the racetronix wire harness

This is how I ended up mounting the relay due to 4 channel ABS being in the way. It came out pretty clean I think

Got the racetronix wiring harness ran the length of the car to the alternator









I didn’t like how using the stock evap line as the return overlapped the stock plastic line, so I’m going to cut down the factory hard line and cut the quick connect pipe to length and run some fuel injection hose



It’s always something.... found a bad fitting on my brake line from the manual master cylinder to the abs delete block

Got my shifter mounted


Shift light mounted and wired up. Let me know what you guys think of the mounting location. I wasn’t sure where I wanted it, but I think it came out ok


Elongated the stock hole for the new shifter cable





No more brake fluid leaks. Ended up buying a pre made Eaton/ aeroquip brake line

What line lock solenoid is that? Are you not going to run your console?

not sure on the solenoid it was bought from burkhart chassis along with the manual master and abs delete block. I am going to end up putting the center console back in but with the m6 shifter panel and shifter boot just bc I like that look and I didn’t want to cut up my a4 shifter panel that was in the car

Leaving it like this for now so I can flush the fuel system and the old evap line that will now be the return






Back on the ground for now. Flush fuel system, prime with oil and startup tune and she will be ready for first startup!

haha hell yeah man. I’ll get a startup video to post up.

UPDATE: car cranks over has no fuel, water or oil leaks as of right now. The car looks like it will have good oil pressure, needs new battery... the fuel pump works and I’m glad I decided to flush the old evap line which is now the return line because a bunch of garbage came out of it (check pic). Just waiting for a startup tune, ******* EFI... I might just try and find someone local who knows HP Tuners. Overall everything is good as of now.

Put a new battery in the car and just turning the key the car has 50 psi of oil pressure. Startup coming soon boys, just trying to find someone local to put a startup tune in it!