Choosing a better cam than a Elgin Sloppy stage 2
08-09-2021, 03:47 PM
#61
I’m refurbishing a use LS2 from a Saab 9-7, I am using a sloppy stage 2 228-230 112 cam .585 lift, It fits without needing piston notches and RHoldener it works surprisingly well in a 6.0. This motor is rated @ 390 stock, Im thinking 450 with this cam and it’s 243 heads with a fresh 3 angle valve job.
Any of the Summit or Cam Motion shelf cams are better than a SS2. The Hawk's Cheatr cam is excellent too.
The following users liked this post:
G Atsma (08-09-2021)
08-10-2021, 02:11 PM
#62
The following 2 users liked this post by 64post:
DualQuadDave (08-12-2021), G Atsma (08-10-2021)
The following 2 users liked this post by LilJayV10:
99 Black Bird T/A (11-16-2021), DualQuadDave (08-12-2021)
The following users liked this post:
64post (08-13-2021)
08-13-2021, 01:06 AM
#65
TECH Fanatic
iTrader: (5)
I didn’t want to mention it but since you did…..yes, eBay cam, a cheap copy of an SS2, $99 cheap. I’m refurbishing the LS2, new cam, lifters, gasket set, valve job with 918 style drop in springs that use stock retainers and locks, trying not to put much in it, I want to resell it, it’s my side hustle ,.tail light guarantee.
The following 2 users liked this post by 64post:
DualQuadDave (08-14-2021), G Atsma (08-13-2021)
11-07-2023, 01:11 PM
#66
Teching In
Join Date: Nov 2023
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
11-07-2023, 03:26 PM
#67
TECH Senior Member
The following users liked this post:
MySons68C20 (11-07-2023)