Valvespring distance from bind
12-15-2020, 12:29 PM
#21
The distance to coil bind is what you look at. 1.800 is not a rule just the standard. Published coilbind numbers aren't always exact either it is best to measure each spring.
With LS7 valves you can set up taller installed height 1.960" is stock. 1237x at 1.850" installed height makes room for .750 lift and lightens up on the spring pressure a little.
With LS7 valves you can set up taller installed height 1.960" is stock. 1237x at 1.850" installed height makes room for .750 lift and lightens up on the spring pressure a little.
🤔 Reasons for asking the 1st Statement. Kills Any ?
12-15-2020, 12:44 PM
#22
Lol the lobe designer recommended springs that are 180 on the seat and 600 open and suggested I move away from the 1238x. They were excited to learn about the 1237x when I shared that back to them as another option instead of the $1000+ circle track springs.
12-15-2020, 12:48 PM
#23
⛏️ (= pick) a cam: Then reference what is sent thru a pm as far as: Lift/duration/lift @.200/overlap/ etc..Lastly 👉What Spring pressure/seat pressure is Wanted or springs are recommended👈 😂🤣
A hydraulic Spring Pressure is Different than what a S/R may be asking? Reason for the ❓
On the Studs you maybe able to do the ER taught Trick....Swap Truions >Tap for bigger studs Move on. Comp cams LS rocker Truions will Swapp for Comp cam BBC 7/16 Truion. If T&D sells other Stud Mounted rockers they May Swapp.
Valve Springs breaks Rarely but, if You've got Good Lifters it's Best to Have More Control of the valve than 🚫🤔
Just seen your post 👆 Always caution on the Safe side and if the manufacturer Has seen both Springs go with there Recommendation 👍😉
A hydraulic Spring Pressure is Different than what a S/R may be asking? Reason for the ❓
On the Studs you maybe able to do the ER taught Trick....Swap Truions >Tap for bigger studs Move on. Comp cams LS rocker Truions will Swapp for Comp cam BBC 7/16 Truion. If T&D sells other Stud Mounted rockers they May Swapp.
Valve Springs breaks Rarely but, if You've got Good Lifters it's Best to Have More Control of the valve than 🚫🤔
Just seen your post 👆 Always caution on the Safe side and if the manufacturer Has seen both Springs go with there Recommendation 👍😉
The following users liked this post:
spanks13 (12-15-2020)
12-15-2020, 12:59 PM
#24
If someone beats me over the Head I'd Hope they'd have control....💩 bouncing on my Head with faster intervals..... Sounds something like how a Air ⛽ works and valves 😂🤣