LS2 402 short block at SDPC!
01-21-2006, 07:49 PM
#481
Teching In
Join Date: Dec 2001
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by John_D.
Chrispy, I heard that Kris is leaving, or has already left. I've been playing phone tag with SDPC for almost 2 weeks trying to get a shortblock ordered... They haven't been returning phone calls, so I just talk to whoever answers the phone now, instead of trying to get back with the last person I spoke to...
Kris is leaving on the 27th.
01-21-2006, 10:52 PM
#482
Staging Lane
iTrader: (3)
Join Date: Nov 2005
Location: Rio Rancho,NM USA
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I've been playing phone tag with them also with no returned calls from Kris. My motor was supposed to be completed the end of the year (paid for 100%) and I was just waiting on some dyno runs that they were supposed to run for the last 2 months to make a cam choice. I sure hope this turns out ok..... 
Last edited by Hal StClair; 01-22-2006 at 01:18 AM.
01-21-2006, 11:26 PM
#483
Originally Posted by Hal StClair
I've been playing phone tag with them also with no returned calls from Kriss. My motor was supposed to be completed the end of the year (paid for 100%) and I was just waiting on some dyno runs that they were supposed to run for the last 2 months to make a cam choice. I sure hope this turns out ok.....
02-01-2006, 11:00 PM
#488
TECH Regular
iTrader: (1)
Join Date: Aug 2002
Location: Scottsdale, Az
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
SDPC is a really good company so I am sure they will have someone good, but it will be close to impossible to replace Kris for those of us on this forum.
Perry
Perry
02-01-2006, 11:42 PM
#489
10 Second Club
iTrader: (15)
Join Date: Nov 2001
Location: St. Michael, MN.
Posts: 4,519
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Perry Kincy
SDPC is a really good company so I am sure they will have someone good, but it will be close to impossible to replace Kris for those of us on this forum.
Perry
Perry
Traver
02-02-2006, 01:44 PM
#491
LS1TECH & Trucks Sponsor
iTrader: (4)
Join Date: Feb 2006
Location: Lubbock, TX
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
SDPC Update/Info for KJ and LS1Tech To all the LS1Tech members;
My name is Brian Gruben (aka Big ***** G), and I will be your contact for all of KJ’s current and past projects. I will also be the new SDPC director for LS1Tech.
Kris is starting a new career in a new town and we here at SDPC wish him the best of luck and success! Kris and his wife had the opportunity to move to a new location so that they could both be closer to their families -- something that they had really desired!
As for me, I previously worked at SDPC for 10-years before leaving to work at a professional race engine machine shop for about 4-years. In my past roll at SDPC, I worked in the Performance Department in both sales and tech assistance, so I am not a newcomer to the industry! Nicky made me a wonderful offer to come back to this great organization and I look forward to meeting all of your expectations and needs. Some of you I may have dealt with in the past!
We are working on some new specials and engine combinations. We also just finished round 1 of some very interesting dyno testing on our 402’s! I am putting all of this together for results and info --- hope to have this posted by Monday. Great stuff is coming!
I am in the process of answering all of your PM's that were sent to KJ. I am going to try and have them done in the next few days. If you need to speak to me personally you can contact me at 800-456-0211 ext 354 or email me at bgruben@sdpc2000.com
Thanks!
My name is Brian Gruben (aka Big ***** G), and I will be your contact for all of KJ’s current and past projects. I will also be the new SDPC director for LS1Tech.
Kris is starting a new career in a new town and we here at SDPC wish him the best of luck and success! Kris and his wife had the opportunity to move to a new location so that they could both be closer to their families -- something that they had really desired!
As for me, I previously worked at SDPC for 10-years before leaving to work at a professional race engine machine shop for about 4-years. In my past roll at SDPC, I worked in the Performance Department in both sales and tech assistance, so I am not a newcomer to the industry! Nicky made me a wonderful offer to come back to this great organization and I look forward to meeting all of your expectations and needs. Some of you I may have dealt with in the past!
We are working on some new specials and engine combinations. We also just finished round 1 of some very interesting dyno testing on our 402’s! I am putting all of this together for results and info --- hope to have this posted by Monday. Great stuff is coming!
I am in the process of answering all of your PM's that were sent to KJ. I am going to try and have them done in the next few days. If you need to speak to me personally you can contact me at 800-456-0211 ext 354 or email me at bgruben@sdpc2000.com
Thanks!
02-03-2006, 12:24 PM
#493
Welcome on board, or back I guess!! I'm looking forward to talking with you in regards to building a 402 for my 2000 Trans Am. I just love the numbers that package is putting down and with the wiring harness available, it's so much easier to install! Nice to hear they got someone good to replace Kris.
Brian
Brian
02-05-2006, 02:19 AM
#496
Big ***** we have install two of those motors in the last few month's and should be doing more dyno testing on them soon. the first owner was very suprised at the numbers his Pre boost SDPC 402 made with 'only' 9:1 
He was extremely worried about how it would run N/A till we got the Blower on it. To his suprise his new Blower motor made 25 more HP and 40 more FT of TQ then his hot cam 346 did
Next comes the blower
The other vehical is the Fastest H2 in the PNW. he is driving his waiting for the Turbo kit to go on
I am looking forward to continued business with SDPC!
He was extremely worried about how it would run N/A till we got the Blower on it. To his suprise his new Blower motor made 25 more HP and 40 more FT of TQ then his hot cam 346 did Next comes the blower
The other vehical is the Fastest H2 in the PNW. he is driving his waiting for the Turbo kit to go on I am looking forward to continued business with SDPC!
02-05-2006, 04:28 PM
#497
TECH Apprentice
iTrader: (1)
Join Date: Apr 2005
Location: Tampa Bay Area, FL
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bg-sdpc
To all the LS1Tech members;
My name is Brian Gruben (aka Big ***** G), and I will be your contact for all of KJ’s current and past projects. I will also be the new SDPC director for LS1Tech.
Kris is starting a new career in a new town and we here at SDPC wish him the best of luck and success! Kris and his wife had the opportunity to move to a new location so that they could both be closer to their families -- something that they had really desired!
As for me, I previously worked at SDPC for 10-years before leaving to work at a professional race engine machine shop for about 4-years. In my past roll at SDPC, I worked in the Performance Department in both sales and tech assistance, so I am not a newcomer to the industry! Nicky made me a wonderful offer to come back to this great organization and I look forward to meeting all of your expectations and needs. Some of you I may have dealt with in the past!
We are working on some new specials and engine combinations. We also just finished round 1 of some very interesting dyno testing on our 402’s! I am putting all of this together for results and info --- hope to have this posted by Monday. Great stuff is coming!
I am in the process of answering all of your PM's that were sent to KJ. I am going to try and have them done in the next few days. If you need to speak to me personally you can contact me at 800-456-0211 ext 354 or email me at bgruben@sdpc2000.com
Thanks!
My name is Brian Gruben (aka Big ***** G), and I will be your contact for all of KJ’s current and past projects. I will also be the new SDPC director for LS1Tech.
Kris is starting a new career in a new town and we here at SDPC wish him the best of luck and success! Kris and his wife had the opportunity to move to a new location so that they could both be closer to their families -- something that they had really desired!
As for me, I previously worked at SDPC for 10-years before leaving to work at a professional race engine machine shop for about 4-years. In my past roll at SDPC, I worked in the Performance Department in both sales and tech assistance, so I am not a newcomer to the industry! Nicky made me a wonderful offer to come back to this great organization and I look forward to meeting all of your expectations and needs. Some of you I may have dealt with in the past!
We are working on some new specials and engine combinations. We also just finished round 1 of some very interesting dyno testing on our 402’s! I am putting all of this together for results and info --- hope to have this posted by Monday. Great stuff is coming!
I am in the process of answering all of your PM's that were sent to KJ. I am going to try and have them done in the next few days. If you need to speak to me personally you can contact me at 800-456-0211 ext 354 or email me at bgruben@sdpc2000.com
Thanks!
02-06-2006, 01:05 PM
#498
Welcome Big ***** G.. 
..you have some big shoes to fill..KJ was real a real pro and went out of his way to help customers...I am sure that you are well qualified for the job if they asked you to come back to SCPC..I have had nothing but positive experiences with your company...I am looking forward to the results of the 402 dyno sessions and good luck to you sir.. 
..you have some big shoes to fill..KJ was real a real pro and went out of his way to help customers...I am sure that you are well qualified for the job if they asked you to come back to SCPC..I have had nothing but positive experiences with your company...I am looking forward to the results of the 402 dyno sessions and good luck to you sir.. 