Ls6 to ls2 cam sensor.
Originally Posted by linn.35
ok
cam sensor side
a=brown
b=pink
c=red
harness side behind intake
a=brown
b=pink
c=red
so its the same on both sides
cam sensor side
a=brown
b=pink
c=red
harness side behind intake
a=brown
b=pink
c=red
so its the same on both sides
Thread Starter
11 Second Club
Joined: Dec 2004
Posts: 196
Likes: 0
From: columbus, ohio
Originally Posted by Katech
I'm not at work right now but if I remember correctly A and C should be reversed.
Ok will do that and see what happens. I appreciate your help alot.
Originally Posted by 2ktransam
I am having the same problem. How did you guys get the wires out of the plug or did you just cut them to do the switch?
Originally Posted by Katech
There is a special tool to release the terminal. I verified today, it is A and C.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by 2ktransam
Is this special tool something that you can pick up at Advance or Autozone?
I've never seen one at an Autozone or Advance, but then again I've never looked. This is what they look like. You can buy right from Caspers and they are an LS1tech sponsor.
https://www.casperselectronics.com/M...gory_Code=conn
