Some L92 + cam engine dyno numbers
Thread Starter
10 Second Club
iTrader: (25)
Joined: Dec 2004
Posts: 2,554
Likes: 1
From: Kannapolis, NC
Some L92 + cam engine dyno numbers Been told by Jason at TSP that they engine dynoed a 418 ci with the L92/L76 setup. The heads are ported and flow 360/245ish the cam was a 248/256 and they got 635 which equates to roughly 535rwhp thru an M6. Not bad numbers IMO. He is working on different cams on the dyno, as soon as I hear more I will post up the info. This was with the cam straight up. He was going to advance all the cams 2 and 4 degrees to see what those heads like.
Sounds promising. Keep us posted on the numbers.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by 383ss
thanks for the info. I really hope they find another 50hp out of it. LS1 heads can make those numbers. I wish somebody would figure these heads out!
show me these LS1 heads that are making 635 crank hp on 418 cubes with hyd. cam. Please. Where????
418 cubes and about 545-555 rwhp with a cam that probaly isn't close to optimum is AWSOME. 427 strokers with completely ported LS6 heads with comprable cam size and FAST 90/90 setups are about 550 rwhp, and this combo has been scienced out for years. A 418 with ported L92 and L76 set up is a LOT cheaper than a 427 LS1 series motor as well.
I also think we will see 650-675 crank hp with the right cam, still being a hyd roller too!
Figure about $7500-$7700 TOTAL for a forged 418 shortblock ($4500), cam ($500), ported/assembled heads ($1800-$2000), and L76 intake/TB/Rails/Injectors ($528). That is a HELL of a deal for a brand new forged 400+ inch motor that makes this kind of power with quite a few factory parts! Exciting times for LSX'ers!
SDB
TECH Veteran
Joined: Feb 2002
Posts: 4,049
Likes: 2
From: Loganville, GA
Originally Posted by SDB
show me these LS1 heads that are making 635 crank hp on 418 cubes with hyd. cam. Please. Where????
418 cubes and about 545-555 rwhp with a cam that probaly isn't close to optimum is AWSOME. 427 strokers with completely ported LS6 heads with comprable cam size and FAST 90/90 setups are about 550 rwhp, and this combo has been scienced out for years. A 418 with ported L92 and L76 set up is a LOT cheaper than a 427 LS1 series motor as well.
I also think we will see 650-675 crank hp with the right cam, still being a hyd roller too!
Figure about $7500-$7700 TOTAL for a forged 418 shortblock ($4500), cam ($500), ported/assembled heads ($1800-$2000), and L76 intake/TB/Rails/Injectors ($528). That is a HELL of a deal for a brand new forged 400+ inch motor that makes this kind of power with quite a few factory parts! Exciting times for LSX'ers!
SDB
418 cubes and about 545-555 rwhp with a cam that probaly isn't close to optimum is AWSOME. 427 strokers with completely ported LS6 heads with comprable cam size and FAST 90/90 setups are about 550 rwhp, and this combo has been scienced out for years. A 418 with ported L92 and L76 set up is a LOT cheaper than a 427 LS1 series motor as well.
I also think we will see 650-675 crank hp with the right cam, still being a hyd roller too!
Figure about $7500-$7700 TOTAL for a forged 418 shortblock ($4500), cam ($500), ported/assembled heads ($1800-$2000), and L76 intake/TB/Rails/Injectors ($528). That is a HELL of a deal for a brand new forged 400+ inch motor that makes this kind of power with quite a few factory parts! Exciting times for LSX'ers!
SDB
i was expecting the same if not better results than what we have been seeing so far. but its still new in the game too.
Originally Posted by SDB
show me these LS1 heads that are making 635 crank hp on 418 cubes with hyd. cam. Please. Where????
418 cubes and about 545-555 rwhp with a cam that probaly isn't close to optimum is AWSOME. 427 strokers with completely ported LS6 heads with comprable cam size and FAST 90/90 setups are about 550 rwhp, and this combo has been scienced out for years. A 418 with ported L92 and L76 set up is a LOT cheaper than a 427 LS1 series motor as well.
I also think we will see 650-675 crank hp with the right cam, still being a hyd roller too!
Figure about $7500-$7700 TOTAL for a forged 418 shortblock ($4500), cam ($500), ported/assembled heads ($1800-$2000), and L76 intake/TB/Rails/Injectors ($528). That is a HELL of a deal for a brand new forged 400+ inch motor that makes this kind of power with quite a few factory parts! Exciting times for LSX'ers!
SDB
418 cubes and about 545-555 rwhp with a cam that probaly isn't close to optimum is AWSOME. 427 strokers with completely ported LS6 heads with comprable cam size and FAST 90/90 setups are about 550 rwhp, and this combo has been scienced out for years. A 418 with ported L92 and L76 set up is a LOT cheaper than a 427 LS1 series motor as well.
I also think we will see 650-675 crank hp with the right cam, still being a hyd roller too!
Figure about $7500-$7700 TOTAL for a forged 418 shortblock ($4500), cam ($500), ported/assembled heads ($1800-$2000), and L76 intake/TB/Rails/Injectors ($528). That is a HELL of a deal for a brand new forged 400+ inch motor that makes this kind of power with quite a few factory parts! Exciting times for LSX'ers!
SDB
my 408 with a far from optimal cam, made 550rwhp with ls1 heads. and they didn't even flow 300cfm
Originally Posted by 383ss
mine
my 408 with a far from optimal cam, made 550rwhp with ls1 heads. and they didn't even flow 300cfm
my 408 with a far from optimal cam, made 550rwhp with ls1 heads. and they didn't even flow 300cfm
