Fly cutting pistons for L92's?

Reply Subscribe

Thread Tools

Search this Thread

Jul 17, 2007 | 12:29 PM

sweetness

Thread Starter

TECH Apprentice

Joined: Nov 2006

Posts: 308

Likes: 0

From: worcester,ma

Fly cutting pistons for L92's?

I am looking into this L92/L76 combo and am wondering if anybody has some insight on whether or not I would run into pvc problems with my cam. 232/234 595. 598. 112lsa... I have been searching this topic for the past hour and can't find the information I need. Thanks

Jul 18, 2007 | 09:43 PM

LSInnovations

Banned

iTrader: (7)

Joined: May 2007

Posts: 221

Likes: 0

Ive got a 242/250 .62x/.63x , 114 in a l92 headed motor with standard mahle pistons in a 408". nothing special needed

Jul 18, 2007 | 09:51 PM

superssport

On The Tree

iTrader: (150)

Joined: Feb 2007

Posts: 144

Likes: 0

From: West Bend, WI

I have a stock bottom end ls2 with the l92 setup. I have a 234/238 .607/.615 and have no problems. You should be just fine!

Jul 19, 2007 | 12:01 AM

sweetness

Thread Starter

TECH Apprentice

Joined: Nov 2006

Posts: 308

Likes: 0

From: worcester,ma

Are you kidding me? SWEET! I have been bummed out the past couple of days because I was told the L92's would not work with my cam

Jul 19, 2007 | 10:15 AM

Jason 98 TA

LS1Tech Premium Sponsor

iTrader: (4)

Joined: Nov 2001

Posts: 4,229

Likes: 4

From: Texas!

We have a couple of those cutters being made right now. With the PRC stock valve 6.2l heads decked .040" for a 63cc chamber you only lose .020" of p/v! We specifically setup that port/cylinder head configuration to help keep p/v for the ls2 guys!

__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com

Jul 19, 2007 | 12:52 PM

sweetness

Thread Starter

TECH Apprentice

Joined: Nov 2006

Posts: 308

Likes: 0

From: worcester,ma

cnc ported L92's

do you guys deal the L76 intake?

Jul 20, 2007 | 09:19 PM

Patrick G

LS1 Tech Administrator

iTrader: (14)

Joined: Nov 2001

Posts: 8,246

Likes: 34

From: Victoria, TX

Moved from Advanced Tech. More eyes in here.

__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.