Strange Engineering S60 (Dana 60 rearend)
#41
Kleeborp the Moderator™
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by BMR Fabrication Inc.
All of our torque arms will work with the S60 except for the non adjustable. We have a modified torque arm bracket that will allow the arm to be as close as possible to the differential giving the most room possible in the tunnel for clearance. As for any other products we will have to wait and see...
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Lee Spicher
lee@bmrfabrication.com
(813)986-9302
Guess someone will have to get some pics, or I'll just stick with a 12-bolt.
#42
LS1Tech Sponsor
iTrader: (22)
Join Date: Mar 2005
Location: 32639 Groesbeck HWY. Fraser MI 48026
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by MeentSS02
That's exactly what I DIDN'T want to hear...I do NOT want to get rid of my LG torque arm (non-adjustable, and looks to take up about the same amount of space as your non-adjustable).
Guess someone will have to get some pics, or I'll just stick with a 12-bolt.
Guess someone will have to get some pics, or I'll just stick with a 12-bolt.
It shouldn't be too hard to grind your mount to fit a D60.
#47
8 SEC SLOPPY SHOT!!!
iTrader: (15)
Join Date: Oct 2002
Location: lombard,IL
Posts: 1,862
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I didn't wanna read all the post but i just installed one yesterday in a 69 camaro but it had drum brake setup on it.This was all done by strange ready to bolt in and it tilt the scale at 245 pounds dry.
This thing is a beast it was like rolling a fat bitch under a car.
![EEK !!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_eek2.gif)
#49
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Central Massachusetts
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Strange Engineering redesigned the entire rear end to fit the 4th gen F-body application... it's not the same rear housing as the original Dana-60, just the center section!
Still, I'd like to see the offical weight!!!
Shea
Still, I'd like to see the offical weight!!!
Shea
#50
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's a bit of information for you guys (I may be repeating some of what was previously mentioned). Gears are from 3.54 up to 5.87, your driveshaft has to be shortened or better yet, when you’re purchasing a new rear, purchase a new driveshaft as the stockers have much to be desired.
The upgraded support cover is not advisable for stock style sway bars (too large, the stock sway bar will interfere during travel, you can choose a Detroit locker, and power lock...typical setup is ~ 20 lbs heavier in comparison to the typical strange 12 bolt setup. If weight is a main concern, consider a spool setup...you'll reap the most benefits regarding weight.
We do not run GP's, we do price-match products we do not manufacture or design.
It's nice to get rock bottom pricing, don't overlook customer service. Customer service is something we do not take lightly! We are not e-bay, if you want e-bay pricing, then many times, you may be getting e-bay services...none!
The rear-end is not listed on our site as of yet, but should be updated and added within the month (hopefully). Retail is 2295.00 for the standard/street strip setup; Retail for the drag setup is 2049.00. Public pricing (not shown at this time on the website currently) for the both will be slightly less.
As mentioned previously, for our Bogart customers, we provide non-public (Bogart preferred) exclusive pricing. If you do NOT own or are NOT purchasing our Bogart products from us, then you are NOT eligible to receive non-public pricing. There is no exception to this rule.
The upgraded support cover is not advisable for stock style sway bars (too large, the stock sway bar will interfere during travel, you can choose a Detroit locker, and power lock...typical setup is ~ 20 lbs heavier in comparison to the typical strange 12 bolt setup. If weight is a main concern, consider a spool setup...you'll reap the most benefits regarding weight.
We do not run GP's, we do price-match products we do not manufacture or design.
It's nice to get rock bottom pricing, don't overlook customer service. Customer service is something we do not take lightly! We are not e-bay, if you want e-bay pricing, then many times, you may be getting e-bay services...none!
The rear-end is not listed on our site as of yet, but should be updated and added within the month (hopefully). Retail is 2295.00 for the standard/street strip setup; Retail for the drag setup is 2049.00. Public pricing (not shown at this time on the website currently) for the both will be slightly less.
As mentioned previously, for our Bogart customers, we provide non-public (Bogart preferred) exclusive pricing. If you do NOT own or are NOT purchasing our Bogart products from us, then you are NOT eligible to receive non-public pricing. There is no exception to this rule.
#51
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Central Massachusetts
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
BMR Fabrication makes sway bar relocation kits to solve the problem with the upgraded support cover. I think the kit is less than $70.00
As posted earlier... they also make the torque arm for this aplication.
I agree with the whole driveshaft deal, you will need a strong drive shaft if you plan to abuse this rearend... might as well go ahead and order a chrome-moly unit from strange to fit this application.
For the people bitching about weight. 20lbs should be a non-issue when it comes to the strength you gain by chosing this rearend!
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
As posted earlier... they also make the torque arm for this aplication.
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
I agree with the whole driveshaft deal, you will need a strong drive shaft if you plan to abuse this rearend... might as well go ahead and order a chrome-moly unit from strange to fit this application.
For the people bitching about weight. 20lbs should be a non-issue when it comes to the strength you gain by chosing this rearend!
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#52
10 Second Club
iTrader: (12)
Join Date: Dec 2004
Location: Birmingham, Alabama
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why go to a Dana 60? They are things of the past. The majority of hardcore racers run the Ford 9in rears. Most all Outlaw 10.5 cars and Promod cars are running the 9 inch rear ends. So if a 2000hp+ car can run the 9in then why can't a 400rwhp fbody? lol
#53
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Houdini
BMR Fabrication makes sway bar relocation kits to solve the problem with the upgraded support cover. I think the kit is less than $70.00
As posted earlier... they also make the torque arm for this aplication.
I agree with the whole driveshaft deal, you will need a strong drive shaft if you plan to abuse this rearend... might as well go ahead and order a chrome-moly unit from strange to fit this application.
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
As posted earlier... they also make the torque arm for this aplication.
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
I agree with the whole driveshaft deal, you will need a strong drive shaft if you plan to abuse this rearend... might as well go ahead and order a chrome-moly unit from strange to fit this application.
#54
9 Second Club
iTrader: (11)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i want to know how it has almost a 1 inch larger ring gear, the same type posi/ spool etc, weighs more, and has 0 drivetrain loss over a 12 bolt........if this is true i may be in the market. but i am not giving up my brand new bmr t/a. id also like to upgraded aluminum cover but cant loose my sway bar either. my car is also lowered. what about the compatability with c/a relocation brackets? that hasnt been brought up yet. i was going to order my 12 bolt in a couple weeks but im gonna hold off and see what comes of this.
#55
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Central Massachusetts
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ls2 bait
i want to know how it has almost a 1 inch larger ring gear, the same type posi/ spool etc, weighs more, and has 0 drivetrain loss over a 12 bolt........if this is true i may be in the market. but i am not giving up my brand new bmr t/a. id also like to upgraded aluminum cover but cant loose my sway bar either. my car is also lowered. what about the compatability with c/a relocation brackets? that hasnt been brought up yet. i was going to order my 12 bolt in a couple weeks but im gonna hold off and see what comes of this.
The total weight of the rearend is not the deciding factor on how much drivetrain loss you will incure when running any said unit. It's the total weight of all moving parts within that assembly, and the ease in which they move/rotate that determains the efficiency of the unit (and by "unit", I mean rearend).
The pinion angle of the S60 is far better than that of a 9" rear, so even though it's rotational mass is greater than a 9", the S60 has less frictional loss, making up for the weight difference... and then some!
You might be able to use your existing BMR torque arm. I'd e-mail them (BMR) with your thoughts and concerns, before giving up for such a small reason.
The same goes for the sway bars. BMR makes a kit to relocate the sway bar mounts and gain clearance for aftermarket support covers, my guess is that it will cure any S60 problems also.
My car is also lowered, so I have the same concern. Again, BMR makes weld-on relocation brackets for all diameterS of axle tubes... control arm issue resolved!
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
I think Strange Engineering and BMR own me some money for pushin their products.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Shea
(aka. Houdini)
#58
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2001
Location: Detroit, Michigan
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea what do you want to know? My DriveLine Solutions built Dana will be going in shortly.
The reason the Dana has the slight advantage over the 9" (IMO) is because 1. pinion angle and 2. better diff option.
The new Detroit TrueTrac diff is probably the best street/track diff out there. Maintnance free, no clutches to mess with, and very strong. However, the TrueTrac for a Dana 60 is beefier than for a 9". Max size is 31 spline for a 9", and 35" for a Dana 60. have a look:
http://www.reiderracing.com/truetracapp.htm
That alone sold me. This diff will support alot of power. See these pics I took a couple weeks back. This diff is a honker!!!!!!!! https://ls1tech.com/forums/gears-axles/477059-my-driveline-solutions-dana-60-build-pics.html
Scott@DLS can answer any questions and he'll take care of you.
The reason the Dana has the slight advantage over the 9" (IMO) is because 1. pinion angle and 2. better diff option.
The new Detroit TrueTrac diff is probably the best street/track diff out there. Maintnance free, no clutches to mess with, and very strong. However, the TrueTrac for a Dana 60 is beefier than for a 9". Max size is 31 spline for a 9", and 35" for a Dana 60. have a look:
http://www.reiderracing.com/truetracapp.htm
That alone sold me. This diff will support alot of power. See these pics I took a couple weeks back. This diff is a honker!!!!!!!! https://ls1tech.com/forums/gears-axles/477059-my-driveline-solutions-dana-60-build-pics.html
Scott@DLS can answer any questions and he'll take care of you.