Introductions & Greetings New to the site? Say hello!

from K20 to LS1.

Thread Tools
 
Search this Thread
 
Old 12-08-2007 | 01:24 PM
  #1  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default from K20 to LS1.

Hey, Im Justin, I have a friend here somewhere on the forums who had a z28, but im not sure what his SN is on here.

Right now I have an import, a supercharged RSX-s with about 300HP, I like it alot, but I HATE front wheel drive, I have crazy traction problems even in third gear, and they dont make traction bars, thus I will never get to have great traction, I can have 800 HP and still only run 10 on the 1/4 mile.

So I think im going to get an LS1. But im thinking about building the GTM Supercar, with the LS1 and maybe turbo it.

Here is the car I will soon be parting out




Here is a vid at 5psi, its at 11 now
Old 12-08-2007 | 01:40 PM
  #2  
Super28Sport's Avatar
TECH Apprentice
 
Joined: Aug 2007
Posts: 337
Likes: 0
From: USA
Default

Yea the LSX is always a good platform to begin with.
Old 12-08-2007 | 02:45 PM
  #3  
LSWon00's Avatar
TECH Regular

iTrader: (3)
 
Joined: Sep 2005
Posts: 450
Likes: 0
From: Its classified.
Default

K20's make some nice power.
Old 12-08-2007 | 03:55 PM
  #4  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

yeah they make nice power, but shitty traction, even with good motor mounts, torque dampner, slicks, and LSD, you still get wheelspin up the whazoo, lol. first is pretty much useless, second is pretty bad if I dont drop it in gear the right way, or ill get wheel spin or wheel hop like crazy, no fun.

And yeah, I chose the LS1 because its an older LS engine, thus more mods are out for it, or so im told, and as much as id like to have an LS7... I cant afford the gas for it, lol.

LS1 it is, possibly turbo or twin turbo, but boosted for sure.

I <3 boost
Old 12-08-2007 | 03:56 PM
  #5  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

Where is the best place to get a LS1 engine with low mileage and great condition?
Old 12-08-2007 | 04:05 PM
  #6  
Spd-Kilz's Avatar
TECH Junkie
iTrader: (35)
 
Joined: Nov 2005
Posts: 3,424
Likes: 5
From: Rack City
Default

Check out the for sale section

You can usually find lots of nice cars there
Old 12-08-2007 | 04:08 PM
  #7  
Grifter's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Dec 2006
Posts: 1,524
Likes: 5
Default

Originally Posted by crazyfast
Where is the best place to get a LS1 engine with low mileage and great condition?
There's always a lot on eBay. Engine-trans-PCM-harness, whatever you want. They don't seem to go for that much either.

I was in the same boat as you. I owned a couple RWD muscle cars before but I decided to try a FWD turbo. It was a lot of fun but there wasn't any "future" in it. FWD is such a horrible platform to build off of.

Good luck.
Old 12-08-2007 | 05:45 PM
  #8  
SLP LS1's Avatar
TECH Addict
 
Joined: Jan 2004
Posts: 2,042
Likes: 0
From: Grosse Pointe Woods, MI
Default

Originally Posted by Super28Sport
Yea the LSX is always a good platform to begin with.
sure is!
Old 12-08-2007 | 06:12 PM
  #9  
Rob98LS1's Avatar
12 Second Club

iTrader: (5)
 
Joined: Jun 2006
Posts: 662
Likes: 3
From: Sacramento
Default

nice rsx, looks real clean. I have an 03, and it can't get a decent 60' to save its life even stock. You will love the difference of the 98-02 f-bodies, awesome mid range and even better top end, you'll have no regrets. Good luck on the search!
Old 12-08-2007 | 06:12 PM
  #10  
Whitez406's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Jun 2006
Posts: 552
Likes: 0
From: Mohnton, pa
Default

Id like that Jackson Charger for my g/fs 03 RSX.
Old 12-08-2007 | 08:00 PM
  #11  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

I can sell it to you If you can hook me up with some LS1 parts ill sell it to you for low.

Right now its the JRSC, 650cc injectors, 11psi pulley, and belt for $2000

Comptech auto tensioner for $400 (i got it for $500, its BRAND new, and you kinda need it for 11psi, or you shred belts like hell)
Old 12-08-2007 | 10:38 PM
  #12  
Whitez406's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Jun 2006
Posts: 552
Likes: 0
From: Mohnton, pa
Default

I dont have any ls1 parts. What else would i need? Kpro or hondata? What kind of power will that setup put to the wheels?
Old 12-08-2007 | 10:45 PM
  #13  
delsold's Avatar
TECH Enthusiast
iTrader: (7)
 
Joined: Jul 2006
Posts: 623
Likes: 0
From: Fenway
Default

very nice rsx...i had a 283whp turbo del sol at 6psi (race gas + race street tune must have been over 400whp) and it was alot of fun...but i have never once had a regret going the ls1 route. You'll like it, goodluck!
Old 12-08-2007 | 11:06 PM
  #14  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

Originally Posted by Whitez406
I dont have any ls1 parts. What else would i need? Kpro or hondata? What kind of power will that setup put to the wheels?
You need kpro, and I have that, ill sell it to you... but you need to be a type s!

For 7psi you need injectors, plugs, belt.

For 11 you need auto tensioner or electric power steering (auto tensioner is about a grand less, and i have it for sale), and 650cc injectors, 3bar map sensor, and motor mounts.

Im at 11, thus I have everything, except the 3bar map sensor.

If I go forth with this project... let me know, ill hook you up!
Old 12-08-2007 | 11:18 PM
  #15  
Whitez406's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Jun 2006
Posts: 552
Likes: 0
From: Mohnton, pa
Default

Yeah let me know. I have 03 Type S. Def. interested. What kind of price am i looking at total?
Old 12-09-2007 | 06:17 AM
  #16  
Z-RATED94's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Nov 2007
Posts: 1,523
Likes: 0
From: Carol Stream Il.
Default

Originally Posted by crazyfast
Hey, Im Justin, I have a friend here somewhere on the forums who had a z28, but im not sure what his SN is on here.

Right now I have an import, a supercharged RSX-s with about 300HP, I like it alot, but I HATE front wheel drive, I have crazy traction problems even in third gear, and they dont make traction bars, thus I will never get to have great traction, I can have 800 HP and still only run 10 on the 1/4 mile.

So I think im going to get an LS1. But im thinking about building the GTM Supercar, with the LS1 and maybe turbo it.

Here is the car I will soon be parting out




Here is a vid at 5psi, its at 11 now
My buddy is almost done with his GTM Supercar. He's worked with turbos on and off for almost 30 years. From what he said, there's no room for a turbo in that engine compartment. But hey, if someone has figured out a way, let me know and I'll pass it along.
Old 12-09-2007 | 12:12 PM
  #17  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

Originally Posted by Whitez406
Yeah let me know. I have 03 Type S. Def. interested. What kind of price am i looking at total?
PM me your goal, and I wont bs you ill tell you what you need. (goal = quarter mile time or HP?)
Old 12-09-2007 | 12:12 PM
  #18  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

Originally Posted by Z-RATED94
My buddy is almost done with his GTM Supercar. He's worked with turbos on and off for almost 30 years. From what he said, there's no room for a turbo in that engine compartment. But hey, if someone has figured out a way, let me know and I'll pass it along.
How about a blower?
Old 12-09-2007 | 12:20 PM
  #19  
crazyfast's Avatar
Thread Starter
Teching In
 
Joined: Dec 2007
Posts: 2
Likes: 0
Default

Nevermind, I looked, a blower wont fit at all, lol.

Hum... a twin turbo looks possible though.. with some mods. Intercooler would be a bitch though. Might need to put it in front of the rear tires so the scoop in front of it will catch air for it.

If not.. nitrous it is. Or NA
Old 12-09-2007 | 01:10 PM
  #20  
camaroman16's Avatar
On The Tree
 
Joined: Aug 2006
Posts: 162
Likes: 0
Default

hey. welcome to LS1tech. i pmed you about the acura.



All times are GMT -5. The time now is 09:38 PM.