Racetronix Contact
#1
Teching In
Thread Starter
Join Date: Dec 2015
Location: Near E-Town
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Racetronix Contact
Does anyone know how long it takes Racetronix to answer an email? Is there a direct phone number to call? Does anyone know of a dealer in NJ?
I'm in the process of putting my project together and need some input from them. I had one of their BLT1 kit on my 96 Impala SS, along with a Walbro fuel pump, and loved it. I'm looking for the same easy install/setup for my truck since I am getting a cam and supercharger.
Thanks for any help you can send my way.
I'm in the process of putting my project together and need some input from them. I had one of their BLT1 kit on my 96 Impala SS, along with a Walbro fuel pump, and loved it. I'm looking for the same easy install/setup for my truck since I am getting a cam and supercharger.
Thanks for any help you can send my way.
#3
Good luck. When I had questions on my fuel system that I bought from them they didn't return emails or even respond on their own forum. I put a post up here and got a nasty pm from them saying how right in the print when you buy from them their **** doesn't come with instructions or support and a lot of nasty words. I will never buy from them again just because of their pm I got
#4
I just went on their forum and pm'd them they got back to me the next day. I'm wondering if I can put a walbro450 on the grand national hanger I bought from them with a 340 installed. They basicly told me to sell my hanger and buy the hanger with the 450
#6
Teching In
Thread Starter
Join Date: Dec 2015
Location: Near E-Town
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I filled out the "find a local dealer" online request form days ago and got no response.
I also sent them a message about my truck a week or two ago and got no response.
If one of their distributors reads this, please help answer these questions:
My 2010 Colorado has a returnless fuel system. I'm in the process of adding a Magnuson TVS1900 and a 220/228 .598/.598 cam.
1. Will my stock fuel pump handle the demand?
2. Do I need to add a return line?
3. Is there a kit to handle my needs, as in plug and play like the one I put into my 96 Impala SS that Racetronix makes?
4. If not, will I need to use one of Racetronix generic or Walbro Hot Wire kits?
5. What size pump do I need for my application?
6. Is there anything else I would need to make all this happen?
Thank you to anyone that can help me.
I also sent them a message about my truck a week or two ago and got no response.
If one of their distributors reads this, please help answer these questions:
My 2010 Colorado has a returnless fuel system. I'm in the process of adding a Magnuson TVS1900 and a 220/228 .598/.598 cam.
1. Will my stock fuel pump handle the demand?
2. Do I need to add a return line?
3. Is there a kit to handle my needs, as in plug and play like the one I put into my 96 Impala SS that Racetronix makes?
4. If not, will I need to use one of Racetronix generic or Walbro Hot Wire kits?
5. What size pump do I need for my application?
6. Is there anything else I would need to make all this happen?
Thank you to anyone that can help me.
#7
Teching In
Thread Starter
Join Date: Dec 2015
Location: Near E-Town
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
It's all good now. Just got an email saying they "do not offer any upgrades for trucks equipped with FPCM fuel systems at this time". Took a week, but any news is better than nothing.
I still think they make some great products.
I still think they make some great products.