my build progress
my build progress though id keep you guys updated on everything over here. and where im at currently
projected mods for this year:
get full valvetrain upgrade (cam, lifters, springs chain ) mild P&P on the heads
G8 GXP rear diffuser retrofit
Pontiac Aztec bumper support-(aluminum and weighs less)
finish the rear coilovers when i get some time
my current mod list
Enigine
-DT Headers
-Header back 3.0inch Exhaust
-Cherry bombs x3 (resonator and mufflers)
-LS2 Intake manifold stage 2 ported by me w/ LS2 90mm TB
-LS7 Card MAF in 4' housing
-MSD Wires
-NGK TR6IX plugs
-4' FWI
-Innovative LC1 wideband
-Poly filled lower engine mounts
-Custom Poly Trans mount
-Billet Dog bone w/poly bushings by me
-DIY Shift kit
-B&M remote mount trans filter
-HAYDEN RV trans cooler
-0 gauge rewire
-HP tuned by me
Suspension
-ZZP Tubular LCA
-Bilstein coilovers on 350# QA1 springs
-GMPP front sway bar w/poly endlinks
Misc
-relocated battery to trunk
-Custom mesh grilles by me
-custom DRL's by me
-Retrofitted headlights w/4300K bulbs with ZZP HID wire kit
-Smoked L.E.D tails by me and 3rd brake light
-Debadged
-LED interior lighting (white)
-Carbon fiber D.I.C by me
-sprayed dash panels with duplicolor metallic dark
-plastidipped wheels grilles and exhaust tips by me
some current pics
projected mods for this year:
get full valvetrain upgrade (cam, lifters, springs chain ) mild P&P on the heads
G8 GXP rear diffuser retrofit
Pontiac Aztec bumper support-(aluminum and weighs less)
finish the rear coilovers when i get some time
my current mod list
Enigine
-DT Headers
-Header back 3.0inch Exhaust
-Cherry bombs x3 (resonator and mufflers)
-LS2 Intake manifold stage 2 ported by me w/ LS2 90mm TB
-LS7 Card MAF in 4' housing
-MSD Wires
-NGK TR6IX plugs
-4' FWI
-Innovative LC1 wideband
-Poly filled lower engine mounts
-Custom Poly Trans mount
-Billet Dog bone w/poly bushings by me
-DIY Shift kit
-B&M remote mount trans filter
-HAYDEN RV trans cooler
-0 gauge rewire
-HP tuned by me
Suspension
-ZZP Tubular LCA
-Bilstein coilovers on 350# QA1 springs
-GMPP front sway bar w/poly endlinks
Misc
-relocated battery to trunk
-Custom mesh grilles by me
-custom DRL's by me
-Retrofitted headlights w/4300K bulbs with ZZP HID wire kit
-Smoked L.E.D tails by me and 3rd brake light
-Debadged
-LED interior lighting (white)
-Carbon fiber D.I.C by me
-sprayed dash panels with duplicolor metallic dark
-plastidipped wheels grilles and exhaust tips by me
some current pics
Probably 300ish wheel I'm looking to up that and do heads and can soon. My end goal **** who knows I just like to build and wrench and do **** myself. I guess my end goal would be keeping people interested in the ls4 community by building something different.
Keep it up for sure! Too many take easy route and don't actually build their cars...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo so a brief update on what ive been up too.
of course its all DIY lol i dont order **** cause im to cheap lol.
so i started work with the rear underbody diffuser it only shows up in black and whit but the general idea here..
then moved alon to my custom adjustable rear STB i made.
completed my FWI setup shown here
i then made a custom rear motor mount out of the left over poly i had
changed out my 350#12' springs for 10"450 springs...love it..
and today i ditched the tube fin trans cooler for a police package oil cooler i had laying around---reason being its bar plate more efficent and the cores are way bigger than the old trans cooler i was using, its also mounted in a better position and allows more fluid.
of course its all DIY lol i dont order **** cause im to cheap lol.
so i started work with the rear underbody diffuser it only shows up in black and whit but the general idea here..
then moved alon to my custom adjustable rear STB i made.
completed my FWI setup shown here
i then made a custom rear motor mount out of the left over poly i had
changed out my 350#12' springs for 10"450 springs...love it..
and today i ditched the tube fin trans cooler for a police package oil cooler i had laying around---reason being its bar plate more efficent and the cores are way bigger than the old trans cooler i was using, its also mounted in a better position and allows more fluid.
