Trans cooler install question
Which if I've been reading correctly is capable of being used alone to cool the tranny with no problem, but it was sent with rubber hoses. Will this pose a problem cause I've seen the steel hoses be used and how would I install to the tranny? If anyone has a link on a guide is appreciate it
I made a post when I installed the one in my GXP, should be similar for your car. maybe this will help, if not keep searching as there are lots of posts on this subject. Rubber hoses are fine, most every install uses them, Good luck with the install.
https://ls1tech.com/forums/ls4-perfo...r-install.html
It's a relief to know the rubber hose is still perfectly fine.





