Fresh th350 9" tailshaft/converter/BMR mount
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Nov 2002
Location: phoenix,az
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Fresh th350 9" tailshaft/converter/BMR mount
Fresh TH350 with a 9" tail shaft for the ease of installation and utilize the stock driveshaft from your stock set up, speedo gear has been blocked off as well as the detent cable hole, forward manual valve body, hughes race kit, stock case with ears cut to fit into an F body. should support around 700fwhp, maybe a tad more in a light car.
BMR TH350 trans mount, Grey in color.
10" 2.2 STR, 3600 fuddle converter w/anti ballooning plates, works great and was never behind anything with power(never drove the car) just swapping to a turbo 400 and a different combo. This converter is a conventional style converter, will work on ls1's or SB/BB chevy.
New Madman dipstick.
Currently has a stock pan on it.
$900 FIRM.
BMR TH350 trans mount, Grey in color.
10" 2.2 STR, 3600 fuddle converter w/anti ballooning plates, works great and was never behind anything with power(never drove the car) just swapping to a turbo 400 and a different combo. This converter is a conventional style converter, will work on ls1's or SB/BB chevy.
New Madman dipstick.
Currently has a stock pan on it.
$900 FIRM.