Cartek 5X heads
02-24-2009 | 06:58 PM
#1
Thread Starter
Staging Lane
iTrader: (27)
Joined: Nov 2003
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Cartek 5X heads 800.00 shipped SOLD!!! I have a set of Cartek 5X heads. Looking to sell heads complete. Guides are brand new with no run time. Bought a few months ago and sent to cartek for a freshen up. I have the receipt for $755.00 for the clean up and what not. Valve sizes are 2.055 and 1.6. See lower post for complete description. Looking for $800.00 shipped . These are 243 style heads w/ 62cc chambers. I also have flow sheets that were done at an independent shop.
Thanks Louis
Open to offers
Included used comp 921 springs with ti-retainers.
Heads have a brand new set of yellow ls6 springs on them now.
SOLD!!!!
Thanks Louis
Open to offers
Included used comp 921 springs with ti-retainers.
Heads have a brand new set of yellow ls6 springs on them now.
SOLD!!!!
Last edited by lhaitzss; 04-28-2009 at 03:23 PM.
02-26-2009 | 03:38 PM
#6
TECH Fanatic
iTrader: (42)
I have a set of Cartek 5X heads. Heads are designed to be used with a 4.125 bore or larger. Looking to sell heads bare. Guides are brand new with no run time. Bought a few months ago and sent to cartek for a freshen up. I have the receipt for $755.00 for the clean up and what not. Valve sizes are 2.055 and 1.6. This is for the bare heads. Looking for $1200.00 shipped. These are ls1 style heads w/ 62cc chambers. I also have flow sheets that were done at an independent shop.
Willing to trade for a brand new or very close to new set of dart 225"s. Thanks
Willing to trade for a brand new or very close to new set of dart 225"s. Thanks
What casting are these? if its a ls1, shouldnt it be able to be used on a 3.9?
Flow numbers/pictures?
Did you buy new from cartek? What exactly was freshened up?
I know you said bare, but is there valves installed?
Whats the reason for wanting to switch to darts?
02-26-2009 | 07:07 PM
#7
Thread Starter
Staging Lane
iTrader: (27)
Joined: Nov 2003
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Located in Rochester Ny
They are a 243 casting. Intakes are Ferrea and exhaust is REV.
I have the used springs from the heads.
I bough used from this site a few months ago and sent to cartek.
The replaced all 16 guides along with a valve job (Serdi radius cut)
They were also milled to 62cc. If somebody wanted the complete set up I would start the asking price at 850.00 shipped. Thanks Louis
They are a 243 casting. Intakes are Ferrea and exhaust is REV.
I have the used springs from the heads.
I bough used from this site a few months ago and sent to cartek.
The replaced all 16 guides along with a valve job (Serdi radius cut)
They were also milled to 62cc. If somebody wanted the complete set up I would start the asking price at 850.00 shipped. Thanks Louis
Last edited by lhaitzss; 04-07-2009 at 10:14 PM. Reason: Price change