FRDnemesis

iTrader: (19)

http://s15.photobucket.com/albums/a3...%20for%20sale/
For those of you that do not know me personally, I'm a retired disabled veteran. This past June, I've had my 3rd and hopefully last spinal surgery. What I hoped to be a great fix when they fuzed me together with some rods and screws turned out to be a train wreck. I was hoping for good results so I could finish this awesome project which was to be a Forged LSX 454 (Erik Koenig) with LS7 Top end. The problem is; that I am no longer able to climb under or on a car without worsening the side effects of my last surgery. So long story short, after discussing it with my wife at great length, I think it is time to move on and admire the sport as a spectator.

Below I will put a list of the parts that are for sale, whether they a "NEW" still in the box, or whatever their status is! If I cannot sell it as a package deal, then I will be looking for CASH plus your stock parts as an effort to put the Camaro back to stock, as it would be. I will be taking pics and posting a link on photo bucket over the next couple days.


Car Parts List

• NEW Nitrous Express 85mm Billet Nitrous MAF+Delco MAF 190

• Auto Meter Sport Comp Pro 2- 5”Tach w/playback/record/printer port/penlight 300

• Compucar Nitrous-in-a-bag cheater system 250

• NEW LS7 Intake 315

• NEW LS2/LS3/L92/LSX oil pan w/ gasket hardware/oil pickup tube/oil deflector 190 *PENDING*

• NEW Nitrous Express Automatic Bottle Heater 150

• AMS Racing Billet Aluminum Catch Can w/fittings 125

• NEW Katech Knock Harness with LS7 Sensor 100

• NEW LS2/3/7 Edelbrock 2-piece timing cover/sensor/harness 220

• NEW SPOHN WELD-IN Drag sway bar brackets 40

• NEW Casper Electronics A/F ratio pigtail for O2 35

• K&N Filter 30+stock

Spare set of 4:30 gears (perfect wear pattern were super quiet)

Edelbrock 3 ½” Y-pipe








• PRO 5.0 shifter 165 *SOLD*

• BMR REAR Lowering Springs *SOLD*

• NEW Metco Billet Valve cover breather 35 *SOLD*

• HKE LSX 454 Shortblock *SOLD*

Callies Crank 4.100 stroke
Callies 6.125 Rods w/ARP 2000bolts
Wiseco Forged Pistons 4.185 bore 15cc
Total seal rings
Federal Mogul 3/4 Groove main bearings
Chamfered Race rod bearings (coated)
ARP Main Stud kit
ARP cam bolt kit
HKE Camshaft (24X/25X on a 113+3)

• Moser Billet 1350 Yoke for 12 bolt 100 *SOLD*

• NEW DMH 4” Cutout w/electric motor 200 *SOLD*

• 1999 Z28 Sebring Silver w/ leather/t-tops $2,500. as a roller *SOLD*
Leather interior w/ Power driver seat (excellant condition)
T-tops with sun shades
Tinted Glass
12 disc CD-changer
UMI Weld-in sub-frame connectors
Hurst Line Lock
Camaro SS rear wing
Brand NEW VFN 3 1/2" Camaro SS hood
Carbon Fiber mirror covers
Carbon Fiber interior trim package
Billet Grille
HALO headlights with H.I.D. lighting package
Clear lens rear parking markers
Clear lens front turn signal/parking light assy.


• TREMEC T-56 upgraded “Just completely refreshed” 900. *SOLD*
Billet keys
Carbon Fiber Blocker rings
Steel 3-4 shift fork
1-2-3-4 synchro kit
1-2-3-4 Bronze fork pads
Input/output seals
New Input shaft

• Synister Motorsports lightweight Power Steering pulley 90 *SOLD*

• Synister Motorsports lightweight Tensioner pulley 60 *SOLD*

• QA1 lightweight R Model Drag Struts/Drag Shocks (just refreshed) 600+stock *SOLD*

• Eibach Drag Launch Spring system 200+stock *SOLD*

• NEW Nick Williams 90mm TB 300 *SOLD*

• NEW Dual Pillar Pod 40 *SOLD*

• SPOHN Chromoly TQ Arm with G-load brace 450+stock *SOLD*

• NEW BMR K-member 450 *SOLD*

• NEW BMR lower A-arms 400 *SOLD*

• NEW BMR upper A-arms 200 *SOLD*

• NEW GM LS1 motor mounts (2) 75 *SOLD*

• MOSER 12 bolt “Just completely refreshed” 1,500+stock *SOLD*
Moser 33 spline gun-drilled axles
Moser Billet 1350 Yoke
Moser weld-in LCA relocation brackets
Moser Stud Girdle/rear cover
Moser rear Drag Sway Bar brackets
Eaton HD Posi Unit
Yukon 4.10 gears/Timken bearings/races
ABS sensor/ ABS reluctor ring
Metric & 1/2” Drag wheel studs
LT1 rear brake system & backing plates
coated housing

• 18” ADR M-sport Wheels Nitto 555R Tires 900+stock
Nitto 555 275/35/18’s (5k miles still has 98% tread)
Nitto 555R’s 305/35/18 (5k miles no tread left to speak of) *SOLD*

• NEW Billet Specialties Street Lite Drag Wheels $900 *SOLD*

• NEW Moroso DS2 Front runners (stickers still on them) Mounted on above wheels $200 *SOLD*

• M/T True Drag Slicks 28x10.50x15 mounted on above wheels $225 (90% tread) *SOLD*

• PST 4” Carbon Fiber Driveshaft w/cryogenic treated yokes 650+stock
*SOLD*

• Mufflex 4” catback w/Flowmaster 30 series race muffler 450+stock *SOLD*

• 2 Red Sparco Race Seats with slider racks (driver has small tears) 300 *SOLD*

• SPOHN Drag Rear Sway Bar w/rod links/u-bolts/poly bushings 300 *SOLD*

• NEW ATI Super Damper 400 *SOLD*

• Super Sucker Ram Air kit by Macewen Motorsports 150 *SOLD*

• SPOHN LCA’s 125+stock *SOLD*

• SPOHN P-Rod 90+stock *SOLD*

• NEW LS6 Ported high volume oil pump w/pickup o-ring 140 *SOLD*

• NEW LS2 timing set N-Motion 80 *SOLD*

• Texas Speed 85mm Air Lid 100+stock *SOLD*

DYNA BAT dry cell lightweight battery *SOLD*

DYNA BATT powder coated hold down bracket *SOLD*

ODYSSEY dry cell lightweight battery *SOLD*

Laptop for tuning (needs new battery) *SOLD*

(2) NEW RCI 5 point race harnesses *SOLD*



http://s15.photobucket.com/albums/a3...%20for%20sale/



Thanks guys for stopping by and looking!

I have received a ton of well wishes on a good recovery from dozens of guys just stopping by the post; brothers-in-arms and just fellow enthusiasts. Thanks guys, I appreciate the kind words.

Jeff

Slvr00Bird

iTrader: (2)

Sorry to hear about your misfortune and surgical experience. Best of luck on your recovery and moving these parts. Definitely one nice part list!!

transaman98

iTrader: (16)

pics of drag wheels? julians_fritos@hotmail.com

FRDnemesis

iTrader: (19)

This is the style of wheels

http://www.billetspecialties.com/ite...id=251&pid=940

I will take pics for you though and send some to you. Please keep in mind; at the moment, they have BRAND NEW Moros DS2's mounted on the fronts and MT 28x10.50x15's mounted on the back. But I can have them removed if you don't want them. You may need race brakes to get them to fit. I've heard they may not fit LS1 brakes. I have LT1 brakes on my LS1 car.

DarkFormula

iTrader: (80)

Interested in the tensioner. PM me pics and price shipped.

1FASTBIRD

iTrader: (21)

• SPOHN Drag Rear Sway Bar w/rod links/u-bolts/poly bushings
'' Let me get pictures of this and the wheel's with the tires and LS7 intake... Email is mostwantedws6@yahoo.com and give me a price with everything shipped.... Also how many mile's or pass's on the Drag Bar???? I am ready to buy now if everything is good to go... Oh and sorry bro about the back injury and maybe one day you will be back

FRDnemesis

iTrader: (19)

Which wheels, the 18" wheels and tires, or Drag wheels and tires?

Jeff

Jersey Mike

iTrader: (9)

PM sent

1FASTBIRD

iTrader: (21)

The drag wheel's

transaman98

iTrader: (16)

and thats with tires? these require caliper grinding?

motoo344

iTrader: (19)

Do you have pictures od the adrs? Email to motoo344@gmail.com please.

PACKERSz28Camaro

iTrader: (43)

Whenever I hear a story like this I just cringe. My dad also is a disabled veteran with a spinal injury. He kept hearing stories like this and refuses to get surgery on his back. He has been living in extreme pain for a couple years now but will not take the plunge to surgery.

I'm sorry to hear what your going through. Good luck through it.

E

FRDnemesis

iTrader: (19)

http://s15.photobucket.com/albums/a3...0Camaro%20Z28/

These are the ADR's

Jeff

TooSlow5.3

iTrader: (4)

Can I get pictures of the seats? Dustinbake@gmail.com

FRDnemesis

iTrader: (19)

I'll be taking a lot of pictures tomorrow and adding them to my photobucket account for everyone to see!

Jeff

1FASTBIRD

iTrader: (21)

Cool bud just let me know because I am ready to buy... Also can I get the info I asked about the Spohn drag bar please???

ItsNotStock

iTrader: (24)

Are you willing to sell the harnesses separate? What is the date on the tags?

Z28/2002

iTrader: (27)

Damn if I was in the states I'd take that 12 bolt

james562

iTrader: (35)

I dont see any engine details whats the setup and how much?

smok'nZ

iTrader: (160)

Pm sent