AFR 205's & G5X3 cam FS
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
AFR 205's & G5X3 cam FS
I'm trying to gauge the interest in my heads and cam. The heads are AFR 205's which have been milled to 60cc. They have very low miles on them (1000 maybe)
The cam is a LG motorsports G5X3 on a 114 LSA. Not sure of all the exact specs, but can find out if needed. (Grind is hush hush, but the lift is around 610)
The car made 450 at the ground with this package, along w/ your usual bolt ons. Car is now supercharged and Im looking to go w/ bigger cubes. The entire motor can go if someone wants a long block.
heads = $2000 plus shipping
cam = $ 350 plus shipping
The cam is a LG motorsports G5X3 on a 114 LSA. Not sure of all the exact specs, but can find out if needed. (Grind is hush hush, but the lift is around 610)
The car made 450 at the ground with this package, along w/ your usual bolt ons. Car is now supercharged and Im looking to go w/ bigger cubes. The entire motor can go if someone wants a long block.
heads = $2000 plus shipping
cam = $ 350 plus shipping
#4
TECH Regular
iTrader: (7)
Join Date: Jul 2006
Location: Landrum,SC
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
According to LG Motorsports you can AFR heads without any flycutting of the pistions. They say you can even run 59cc AFR heads without flycutting. If you are on stock 243's you can run the G5X3 but you can't do any milling of the heads.