LS7 Corvette Z06 CNC Cylinder heads w/ Patriot Extreme Spings, SS exhaust valves
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Boulder Bubble, Colorado
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Price drop; $ $2450 shipped
WHAT: Up for sale is COMPLETE set of GM LS7 heads from a 2008 Chevrolet Z06 Corvette. These are not your usual run of the mill take off or reconditioned parts. These heads were CNC machined ported then polished by Richard at West Coast Cylinder Heads in Reseda , California.
http://www.proheads.com/
In addition, the stock hollow exhaust valves have been replaced by FERA stainless steel units. To prolong the life of the stock Titanium valves ( and the new stainless exhaust valves) ALL valves were PVD coated to insure long life against the hard factory valve seats. These heads also recieved the Patriot Gold Extreme dual valve spring upgrade complete with titanium retainers. These heads have been milled 30 thousands ( 65 CC combustion chambers) to allow a DIRECT bolt on to stock LS7 motors using the stock 51 thousandths head gaskets ( or aftermarket gasket). I run 91 octane gas here in Denver with NO knock retard. most will run 92 premium at lower elevations.
With these heads on my 454 cu in LS7, the car recorded 572 RWHP and 538 RWTRQ at a corrected 5,800 elevation in Denver Colorado. Lower elevations should see even more HP/TRQ!
- New GM bare castings $1,800
- GM titanium exhaust valves $925.20
- GM exhaust seals $16.15
- GM keepers $12.48
- Ferra stainless exhaust valves $150
- PVD coating of 16 valves $520
-WCCH port/polish/milling $1,100
-Patriot Gold Extreme spring set $275
-Harland Sharp rocker upgrade $275
Total $5073.83
WHY AM I SELLING? I upgraded to an all-out LS7 head for my big cube LS7 motor. I bought the heads outright to prevent downtime with the car. Now these great units are available for direct bolt on to stock or modified motors.
CONDITION: 9/10. ONLY because they are not brand new, BUT they are in excellent shape. The only thing you may want to do before installation is a quick hot tank to clean them and maybe new seals, but the heads only have 6K miles on them. with only 4 track days and 4 pass 's down the drag strip.
SHIPPING: FREE in the continental USA. Packaging is also free.
Additional Items: I also have a complete LSX vacuum system for sale from G Z motorsports ( $450 shipped)
LS7 WCCH Heads :$2450 and I pay the shipping, no cores required!I accept paypal, and certfied bank checks as payment.
WHAT: Up for sale is COMPLETE set of GM LS7 heads from a 2008 Chevrolet Z06 Corvette. These are not your usual run of the mill take off or reconditioned parts. These heads were CNC machined ported then polished by Richard at West Coast Cylinder Heads in Reseda , California.
http://www.proheads.com/
In addition, the stock hollow exhaust valves have been replaced by FERA stainless steel units. To prolong the life of the stock Titanium valves ( and the new stainless exhaust valves) ALL valves were PVD coated to insure long life against the hard factory valve seats. These heads also recieved the Patriot Gold Extreme dual valve spring upgrade complete with titanium retainers. These heads have been milled 30 thousands ( 65 CC combustion chambers) to allow a DIRECT bolt on to stock LS7 motors using the stock 51 thousandths head gaskets ( or aftermarket gasket). I run 91 octane gas here in Denver with NO knock retard. most will run 92 premium at lower elevations.
With these heads on my 454 cu in LS7, the car recorded 572 RWHP and 538 RWTRQ at a corrected 5,800 elevation in Denver Colorado. Lower elevations should see even more HP/TRQ!
- New GM bare castings $1,800
- GM titanium exhaust valves $925.20
- GM exhaust seals $16.15
- GM keepers $12.48
- Ferra stainless exhaust valves $150
- PVD coating of 16 valves $520
-WCCH port/polish/milling $1,100
-Patriot Gold Extreme spring set $275
-Harland Sharp rocker upgrade $275
Total $5073.83
WHY AM I SELLING? I upgraded to an all-out LS7 head for my big cube LS7 motor. I bought the heads outright to prevent downtime with the car. Now these great units are available for direct bolt on to stock or modified motors.
CONDITION: 9/10. ONLY because they are not brand new, BUT they are in excellent shape. The only thing you may want to do before installation is a quick hot tank to clean them and maybe new seals, but the heads only have 6K miles on them. with only 4 track days and 4 pass 's down the drag strip.
SHIPPING: FREE in the continental USA. Packaging is also free.
Additional Items: I also have a complete LSX vacuum system for sale from G Z motorsports ( $450 shipped)
LS7 WCCH Heads :$2450 and I pay the shipping, no cores required!I accept paypal, and certfied bank checks as payment.
Last edited by bowtiguy; 07-27-2009 at 12:43 AM.
Trending Topics
#8
On The Tree
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Boulder Bubble, Colorado
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Although I did not personally flow these heads, Richard said they flow approximately 5% higher than stock as most of the work performed is on the exhasut side to balance these heads out from their stock 360/231 flow numbers at .600 lift
I will supply the custom cam specs to the buyer, that netted the 572/538 rear wheel #'s on these great street heads. This cam was developed by a Nascar Cam supplier out of N.C. No surge or start issues, I could even pull from 500rpm in 6th gear!
I will supply the custom cam specs to the buyer, that netted the 572/538 rear wheel #'s on these great street heads. This cam was developed by a Nascar Cam supplier out of N.C. No surge or start issues, I could even pull from 500rpm in 6th gear!
Last edited by bowtiguy; 05-19-2009 at 11:08 AM.
#14
On The Tree
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Boulder Bubble, Colorado
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
$2450 shipped gets it all!
LS7 WCCH CNC'd heads,
patriot extreme springs,
Titanium intake valves,
Stainles steel exhaust valves
PVD coating of all the valves
LS7 WCCH CNC'd heads,
patriot extreme springs,
Titanium intake valves,
Stainles steel exhaust valves
PVD coating of all the valves
Last edited by bowtiguy; 07-27-2009 at 12:44 AM.
#17
On The Tree
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Boulder Bubble, Colorado
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The accessoried have been sold, Heads available by themselves, you can reuse your stock rockers or have these heads machined to accept Crowler or Jessel shaft mount lifter systems.
Last edited by bowtiguy; 06-05-2009 at 09:15 AM.
#19
On The Tree
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Boulder Bubble, Colorado
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If they don't sell at this price I will leave them in their box's and save them for my wifes 58' vert project.
$2450 and I will pay the shipping!!
$2450 and I will pay the shipping!!
Last edited by bowtiguy; 07-27-2009 at 12:44 AM.