gtorep

iTrader: (18)

Allright Gentlemen, the start of my yearly partout has begun, dont mind the 04joel paper in the pics, thats one of the rules at the GTO site. 04 joel is my other screen name


1st- A used set of Patriot CNC'd Stage 2 243's hand finished with 59cc chambers, 2.055/1.57 valves, Patriot Extreme dual springs, titanium locks and 7d retainers. Patriot says they flow 304 @ .600 and 229cfm @ .600 These heads would be great on a aggressive N/A or Nitrous setup.

The heads have roughly 5000 miles on them, and I just had them resurfaced, hot tanked, springs height checked, and new Viton seals installed. The springs still hold appropriate pressures, and closed pressure is set to 150lbs @ 1.78 installed height.


2nd- A brand new in box Edelbrock Victor Jr. With Rails and Elbow from Intake Elbbows.com, Since I am now selling my car I have no use for this intake. It comes with everything edelbrock sent with it, all hardware and instructions. Elbow not in picture but will be in the morning. The elbow has 90mm throttle body flange and throttle cable bracket for ls1 cars .

Asking 750.00 for the heads + shipping
Asking 550.00 for the Victor Jr, Rails, and Elbow + shipping

If paying with Paypal I will be charging a 3% fee

Heres the Eye Candy, PM me















Victor JR w/ rails





Thanks

ccajun4real

iTrader: (29)

Great prices. Bump................

Cajun

gtorep

iTrader: (18)

Cajun,

Might want to send that PM again, I havnt got it yet and its been a couple of hours.

Thanks

Intel_12

First offer on the heads, pm sent!

ccajun4real

iTrader: (29)

My fault bro, I will step aside, it is not what I thought it was, good luck with the sale.

gtorep

iTrader: (18)

PM replied

gtorep

iTrader: (18)

Sale on heads pending to Intel_12 until further notice.

kwk174

iTrader: (5)

how much for just the rails?

jason00ss

iTrader: (2)

if heads don't sell, i'll def take em off your hands for ya

cyclerage

iTrader: (59)

I'll take the heads if my chance comes up

WS Sicks

same here

jason00ss

iTrader: (2)

any word on the heads???

jason00ss

iTrader: (2)

uumm, hello? if the heads are still available, i'll def. take them

KOOSWS6

iTrader: (1)

Is that a low profile elbow also are the gaskets included

Pewter53

iTrader: (36)

what kind of injectors are these rails made for i have the flex fuel inj's really interested in the vic jr.

bottelfed377

Do you have pics of the elbow im very interested!