MTI Stage 2e heads
07-09-2009 | 06:53 AM
#1
Thread Starter
MTI Stage 2e heads Heads are in excellent condition, they were bought new from MTI back in 2006. I've put about 25,000 on the heads and they performed excellent. Valve springs were replaced a couple years ago and upgraded to comp cams 918s. Flow is just under 300 cfm on the intake side, 209 or so on the exhaust.
I'm selling because I built a 427 and went with TFS 235s.
Asking $1,000 for the heads (price lowered). Feel free to ask questions if you are fairly interested. I can email pics of the flow sheets and heads themselves, the pics are too big to post here.
I'm selling because I built a 427 and went with TFS 235s.
Asking $1,000 for the heads (price lowered). Feel free to ask questions if you are fairly interested. I can email pics of the flow sheets and heads themselves, the pics are too big to post here.
Last edited by General Jack; 07-29-2009 at 05:18 PM.
Trending Topics
08-03-2009 | 12:46 PM
#13
Thread Starter
I made 410 rwhp through a Moser 12 bolt and 2.5" y-pipe. Cars with stock rear ends and better exhaust do 425-430 rwhp on the dyno generally. More importantly I got nearly 119 mph in the 1/4, which shows I was making good power for a reasonably tame daily driven H/C stock cube car. These are not LS6 heads.
