2000 6.0 LQ4 Short Block and Heads
#1
Launching!
Thread Starter
iTrader: (35)
Join Date: Nov 2002
Location: Tallapoosa, GA
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Items I have:
#1 2000 6.0 LQ4 Short Block SOLD
Block SOLD
-Standard 4.0 inch bore block
-block has been honed by machine shop, and cylinders did not clean up fully.
-would be perfect if opened up to as little as 4.005 bore size. Block is in great shape and clean.
-Includes main caps with bolts.
-Includes all coolant passage oil galley screw in plugs.
Crankshaft $150
-Thick flange stock crankshaft. Has been polished by machine shop, main and rod bearings clearances measure out to work fine with standard bearings. Some might prefer to do .001 over on the rods. I will include thick rear cover, which is a little different with a thick flange crank.
Pistons/Rods $100
-All in great shape. You will want to get new piston rings. These are non coated pistons.
#2 2000 6.0 #317 Casting Aluminum Heads
I was told they came off of a marine engine
-Will need a valve job and 2 valves replaced. Never been milled. Currently Cleaned and dissassembled. Includes all vavles, locks and retainers, no valve stem seals
$175
Located in Carrollton, GA 30117
Paypal accepted, and I will ship. Send me a PM with your zip for a shipped price. Thanks. Ben
#1 2000 6.0 LQ4 Short Block SOLD
Block SOLD
-Standard 4.0 inch bore block
-block has been honed by machine shop, and cylinders did not clean up fully.
-would be perfect if opened up to as little as 4.005 bore size. Block is in great shape and clean.
-Includes main caps with bolts.
-Includes all coolant passage oil galley screw in plugs.
Crankshaft $150
-Thick flange stock crankshaft. Has been polished by machine shop, main and rod bearings clearances measure out to work fine with standard bearings. Some might prefer to do .001 over on the rods. I will include thick rear cover, which is a little different with a thick flange crank.
Pistons/Rods $100
-All in great shape. You will want to get new piston rings. These are non coated pistons.
#2 2000 6.0 #317 Casting Aluminum Heads
I was told they came off of a marine engine
-Will need a valve job and 2 valves replaced. Never been milled. Currently Cleaned and dissassembled. Includes all vavles, locks and retainers, no valve stem seals
$175
Located in Carrollton, GA 30117
Paypal accepted, and I will ship. Send me a PM with your zip for a shipped price. Thanks. Ben
Last edited by ILLWIN; 09-01-2009 at 02:01 PM.