LS1 performance parts for sale CHEAP
#1
!Dial-up Director
Thread Starter
LS1 performance parts for sale CHEAP
need
stock ls1 clutch good condition, no flywheel
stock aluminum driveshaft
stock drivers side and passengers side A pillars, dark grey
stock monsoon head unit
stock foglights
for sale
SOLD-GTP Stage 2 5.3L heads, milled .015, 987 dual springs, titanium pushrods, 2.02 - 1.57 valves ( made 445rwhp with TR cam ) - $1900 or 1500 and a set of stock assembled 99+ heads
-FLP headers, 3" FLP y-pipe, 3.5" flowmaster collector - 750
-Hooker catback - 220
SOLD-Custom true dual exhaust for FLP headers, dr gas x pipe, bullet mufflers, turndowns - 200
-Wolfe Racecraft, 6pt cromoly roll bar, dual swingouts, swoop door bars, weld in, new, -$600
SOLD-Crotch strap bracket - $30
SOLD-RCI black 5pt cam lock harness, NEW in box - $100
SOLD-Lingenfelter aluminum draveshaft (http://www.lingenfelter.com/lingenf...=50&pf%5Fid=217) - 150 and a atock one, or 240 outright
SOLD-ASCD RAM air hood, silver, black grills - 550
-BMR adj torque arm, black, like new - 250 and a stock one
-BMR rear swaybar, black, like new, includes poly endlinks - 90
-SPEC stage 4 clutch, only 3k miles, no flywheel - 275
-Eibach prokit lowering springs - 150
-autometer sport comp (silver face) 5" tach, 10krpm with shiftlight - 150
SOLD-autometer electric full sweep fuel pressure gauge, ultra lite - 175
SOLD-autometer air/fuel gauge, ultra lite - 30
SOLD-B&M ripper shifter, 1st gen model, comes with 03 cobra shift handle and 03 Cobra shift **** - 175 ( http://camaroz28.cardomain.com/id/jsears )
-Trade interior pieces with brushed aluminum trim for your stock pieces, see pictures above link, will also include ac vent trim that I did not put on - $150
-Hurst roll control with prebent brake lines, need your stock lines, - 75
-PIAA 510 driving lights to fit trans am holes, super bright, will trade you my modified brackets for your stock ones so they will bolt right in (http://www.piaa.com/Lamps/Lamp-pages/510.html ) - $150
-12" drivers side stealthbox, fiberglass, - 175
-Racetronix PnP fuel pump kit, 98 model - 175 or will trade for stock fuel pump assembley from 98 + $50
SOLD-Poly trans mount, black - 35
SOLD-NEW wlaboro Fuel pump, 255LPH, with install kit - $100
-Hypertech power programmer, 98 - 200
will work out trades for stock parts, all prices are or best offer
can take digi pics of anything on request, all prices plus shipping
email me at jsears8@bellsouth.net or post up
Thanks,
Justin
stock ls1 clutch good condition, no flywheel
stock aluminum driveshaft
stock drivers side and passengers side A pillars, dark grey
stock monsoon head unit
stock foglights
for sale
SOLD-GTP Stage 2 5.3L heads, milled .015, 987 dual springs, titanium pushrods, 2.02 - 1.57 valves ( made 445rwhp with TR cam ) - $1900 or 1500 and a set of stock assembled 99+ heads
-FLP headers, 3" FLP y-pipe, 3.5" flowmaster collector - 750
-Hooker catback - 220
SOLD-Custom true dual exhaust for FLP headers, dr gas x pipe, bullet mufflers, turndowns - 200
-Wolfe Racecraft, 6pt cromoly roll bar, dual swingouts, swoop door bars, weld in, new, -$600
SOLD-Crotch strap bracket - $30
SOLD-RCI black 5pt cam lock harness, NEW in box - $100
SOLD-Lingenfelter aluminum draveshaft (http://www.lingenfelter.com/lingenf...=50&pf%5Fid=217) - 150 and a atock one, or 240 outright
SOLD-ASCD RAM air hood, silver, black grills - 550
-BMR adj torque arm, black, like new - 250 and a stock one
-BMR rear swaybar, black, like new, includes poly endlinks - 90
-SPEC stage 4 clutch, only 3k miles, no flywheel - 275
-Eibach prokit lowering springs - 150
-autometer sport comp (silver face) 5" tach, 10krpm with shiftlight - 150
SOLD-autometer electric full sweep fuel pressure gauge, ultra lite - 175
SOLD-autometer air/fuel gauge, ultra lite - 30
SOLD-B&M ripper shifter, 1st gen model, comes with 03 cobra shift handle and 03 Cobra shift **** - 175 ( http://camaroz28.cardomain.com/id/jsears )
-Trade interior pieces with brushed aluminum trim for your stock pieces, see pictures above link, will also include ac vent trim that I did not put on - $150
-Hurst roll control with prebent brake lines, need your stock lines, - 75
-PIAA 510 driving lights to fit trans am holes, super bright, will trade you my modified brackets for your stock ones so they will bolt right in (http://www.piaa.com/Lamps/Lamp-pages/510.html ) - $150
-12" drivers side stealthbox, fiberglass, - 175
-Racetronix PnP fuel pump kit, 98 model - 175 or will trade for stock fuel pump assembley from 98 + $50
SOLD-Poly trans mount, black - 35
SOLD-NEW wlaboro Fuel pump, 255LPH, with install kit - $100
-Hypertech power programmer, 98 - 200
will work out trades for stock parts, all prices are or best offer
can take digi pics of anything on request, all prices plus shipping
email me at jsears8@bellsouth.net or post up
Thanks,
Justin
Last edited by Sears; 11-27-2003 at 11:14 PM.
#3
!Dial-up Director
Thread Starter
Been busting *** in school (full time, 19 hrs, 3rd year physics), woman (full time), work (full time), and racing my R6 (10.78 so far ) in that order. I'm going to get back into LS1s one day but right now I dont have the funds to keep up. I mainly ride my bike, 1400 miles a month, so the car needs to go. Thanks for asking! I still read just dont contribute. Thanks fer asking!
For the peeps reading this I've been around awhile so you shouldn't worry about dealing with me, I'm honest.
For the peeps reading this I've been around awhile so you shouldn't worry about dealing with me, I'm honest.
#6
TECH Fanatic
iTrader: (12)
Join Date: Jan 2002
Location: York, PA
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Interested in the true dual setup. Pics would greatly help in these matters since I'm in Pa. Do you have the ability to email me some pics of the condition size etc. of the true duals. Thanks
my email is ecurb@blazenet.net
my email is ecurb@blazenet.net
Last edited by Zturd; 11-24-2003 at 06:23 PM.
Trending Topics
#8
TECH Senior Member
iTrader: (9)
VERY VERY VERY interested in the Xpipe set up! I also have stock interior pieces that might work for you to offset some of the cost. Since my car has pretty much gone full race I dont have much use for them. email me with pics of the ture duals
boycejr@goffchaffeegeddes.com
boycejr@goffchaffeegeddes.com
#9
Staging Lane
Join Date: Oct 2003
Location: Wesley Chapel, Fl
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
I have a stock LS1 clutch for my 99 Corvette. Will this work for you? I am interested in the harness. Please email me at SoundsGr8@hotmail.com
#11
!Dial-up Director
Thread Starter
The duals are spoken for locally
The FLP headers are in good condition, a little bit of rust on them where the a/c drips on it but I'll get you some pics. It comes with a custom FLP 3" y-pipe but the cats do not fit it. I have the cats but you would need to have a 3" flange welded on the back side to use them, no big deal really. Price does not include shipping.
The RCI harness is sold
I do not need a stock hood. You can see pics of the hood on the car at
http://camaroz28.cardomain.com/id/jsears
The FLP headers are in good condition, a little bit of rust on them where the a/c drips on it but I'll get you some pics. It comes with a custom FLP 3" y-pipe but the cats do not fit it. I have the cats but you would need to have a 3" flange welded on the back side to use them, no big deal really. Price does not include shipping.
The RCI harness is sold
I do not need a stock hood. You can see pics of the hood on the car at
http://camaroz28.cardomain.com/id/jsears
#15
!Dial-up Director
Thread Starter
Originally Posted by amit
will you ship to canada?
im interested in the eibach pro-kit.
how much does the lower the car again?
im interested in the eibach pro-kit.
how much does the lower the car again?
lowers the car about 1.5"s in the back and 1.3"s in the front
Justin