QTP Gen III High Volume Oil Pump
10-07-2009, 04:07 PM
#1
LS1TECH Sponsor
Thread Starter
iTrader: (23)
Join Date: May 2003
Location: Tampa, FL
Posts: 1,168
Likes: 0
Received 0 Likes
on
0 Posts
QTP Gen III High Volume Oil Pump This pump is practically new, with barely 200 miles on it. Brand new it lists for $180.00, will sell sold thank you
Literature from QTP:
http://shop.quicktimeperformance.com...uct_detail&p=5
The QTP HV Oil Pump provides more volume of oil at a higher pressure relief setting.
The pump is designed with a gerotor designed to displace more than 15% more oil than the original GM design.
A 2mm thicker gear rotor compared to the factory rotor.
The relief spring installed in the pump is designed to increase the internal by-pass pressure setting an additional 10 psi.
The pump design has also been improved by reducing flow restriction.
In addition, pump materials have been changed to improve performance and durability.
These changes improve the pumps efficiency resulting in better performance especially during priming and at low rpm.
This is not a ported oem pump. Brand new cast pump that will out performane any ported factory unit!.
Literature from QTP:
http://shop.quicktimeperformance.com...uct_detail&p=5
The QTP HV Oil Pump provides more volume of oil at a higher pressure relief setting.
The pump is designed with a gerotor designed to displace more than 15% more oil than the original GM design.
A 2mm thicker gear rotor compared to the factory rotor.
The relief spring installed in the pump is designed to increase the internal by-pass pressure setting an additional 10 psi.
The pump design has also been improved by reducing flow restriction.
In addition, pump materials have been changed to improve performance and durability.
These changes improve the pumps efficiency resulting in better performance especially during priming and at low rpm.
This is not a ported oem pump. Brand new cast pump that will out performane any ported factory unit!.
Last edited by JeremyF; 11-05-2009 at 12:18 PM.
