FS: DFW area N20,42#,UD,LT's,F55,EMTs,BOV,Diff,LS1,etc
10-08-2009, 09:51 PM
#1
On The Tree
Thread Starter
iTrader: (11)
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
FS: DFW area N20,42#,UD,LT's,F55,EMTs,BOV,Diff,LS1,etc Cleaning up the shop. All parts are located in DFW area. If shipping is listed, it’s for the lower 48 states only. My prices may not be right on, but I tried to search a little before posting them. Send PM’s if you are going to talk about the price. Thanks for looking.
--------------------------------
**This was completely hidden on an '04 Z06 with a VaraRam installed. If you purchase the kit I will send you the pics of how it was all hidden.**
Custom Hidden N20 Single Nozzle Dry Kit:
Custom single nozzle(made for hidden install)
Nitrous Outlet (NO) N20 noid w/ hi-amp relay
NO Purge noid
Braided main N20 feed line for C5
10lb NO black bottle & gauge w/ mounting board.
Custom C5 ashtray panel w/ switches (you pick one of three shown.)
All of the above $210 shipped
Extra’s
NX remote opener $180 shipped
NO automatic bottle heater w/ transducer and hi-amp relay $125 shipped
NO Trick Dual window switch w/ built-in digital TPS switch SOLD $75 shipped
HSW N20 Interface w/ harness (for tuning dry kit after MAF) very trick little device $110 shipped
----------------------------------------
NX Single Nozzle Wet Kit:
NX Iceman Fuel and N20 noids
NX Purge noid
Shark nozzle
Braided main N20 feed line for C5
10lb NX white bottle & gauge w/ mounting board for center cubby in trunk
Custom C5 ashtray panel w/ switches (you pick one of three shown.)
All of the above $340 shipped
Extra’s
NX remote opener $180 shipped
NO automatic bottle heater w/ transducer and hi-amp relay $125 shipped
NO Trick Dual window switch w/ built-in digital TPS switch SOLD $75 shipped
------------------------------------------------
10lb NX white bottle & gauge w/ mounting board. $115 shipped
NOS bottle heater w/ automatic transducer and hi-amp relay $125 shipped
----------------------------------------------------
Comp Dual springs #921's
Used for 5k miles and engine was parted out. Springs only, no retainers.
SOLD $90 shipped
------------------------------------------------------
Siemens Deka 32lb injectors #9267
At our 58psi fuel pressure they are 42lbs.
Used 8k miles and swapped for 60lb & s/c.
SOLD$140 local
------------------------------------------------
Powerbond 25% underdrive pulley for C5/C6 with Dayco belt
Used 8k miles and swapped for non-ud and s/c.
SOLD$180 shipped
------------------------------------------
TPIS Ceramic coated headers w/ 2-bolt Flange
*You will need exhaust welding done to fit the collector flanges to your existing pipes. These have the AIR fittings with the gaskets and bolts, but you could easily make block-off plates or weld the fittings closed. We swapped to LG Pro's for the new 427.
SOLD $350 local
------------------------------------------
F55 Magnetic Ride Control System (not F45!)
These came off an ’03 Corvette Anniversary Convertible pulled with 15k miles on car. 4 shocks, 4 actuator assemblies, 1 F55 Control Module, 2 white connectors, 2 black connectors with harness, and 6 small bolts. Car was converted to Adjustable QA1’s.
Asking $460 shipped or $380 picked up
------------------------------------------
C6Z06 Factory Runflats- Front
Goodyear Eagle F1 EMT 275/35/18
Date Code 43rd week of 2007
One tire has 6/32” tread depth all the way across.
The other tire has 5/32” tread depth all the way across.
Both tires have some edge wear. No flat repairs have been done.
Asking $75 each plus shipping to lower 48 states
----------------------------------------
--------------------------------
**This was completely hidden on an '04 Z06 with a VaraRam installed. If you purchase the kit I will send you the pics of how it was all hidden.**
Custom Hidden N20 Single Nozzle Dry Kit:
Custom single nozzle(made for hidden install)
Nitrous Outlet (NO) N20 noid w/ hi-amp relay
NO Purge noid
Braided main N20 feed line for C5
10lb NO black bottle & gauge w/ mounting board.
Custom C5 ashtray panel w/ switches (you pick one of three shown.)
All of the above $210 shipped
Extra’s
NX remote opener $180 shipped
NO automatic bottle heater w/ transducer and hi-amp relay $125 shipped
NO Trick Dual window switch w/ built-in digital TPS switch SOLD $75 shipped
HSW N20 Interface w/ harness (for tuning dry kit after MAF) very trick little device $110 shipped
----------------------------------------
NX Single Nozzle Wet Kit:
NX Iceman Fuel and N20 noids
NX Purge noid
Shark nozzle
Braided main N20 feed line for C5
10lb NX white bottle & gauge w/ mounting board for center cubby in trunk
Custom C5 ashtray panel w/ switches (you pick one of three shown.)
All of the above $340 shipped
Extra’s
NX remote opener $180 shipped
NO automatic bottle heater w/ transducer and hi-amp relay $125 shipped
NO Trick Dual window switch w/ built-in digital TPS switch SOLD $75 shipped
------------------------------------------------
10lb NX white bottle & gauge w/ mounting board. $115 shipped
NOS bottle heater w/ automatic transducer and hi-amp relay $125 shipped
----------------------------------------------------
Comp Dual springs #921's
Used for 5k miles and engine was parted out. Springs only, no retainers.
SOLD $90 shipped
------------------------------------------------------
Siemens Deka 32lb injectors #9267
At our 58psi fuel pressure they are 42lbs.
Used 8k miles and swapped for 60lb & s/c.
SOLD$140 local
------------------------------------------------
Powerbond 25% underdrive pulley for C5/C6 with Dayco belt
Used 8k miles and swapped for non-ud and s/c.
SOLD$180 shipped
------------------------------------------
TPIS Ceramic coated headers w/ 2-bolt Flange
*You will need exhaust welding done to fit the collector flanges to your existing pipes. These have the AIR fittings with the gaskets and bolts, but you could easily make block-off plates or weld the fittings closed. We swapped to LG Pro's for the new 427.
SOLD $350 local
------------------------------------------
F55 Magnetic Ride Control System (not F45!)
These came off an ’03 Corvette Anniversary Convertible pulled with 15k miles on car. 4 shocks, 4 actuator assemblies, 1 F55 Control Module, 2 white connectors, 2 black connectors with harness, and 6 small bolts. Car was converted to Adjustable QA1’s.
Asking $460 shipped or $380 picked up
------------------------------------------
C6Z06 Factory Runflats- Front
Goodyear Eagle F1 EMT 275/35/18
Date Code 43rd week of 2007
One tire has 6/32” tread depth all the way across.
The other tire has 5/32” tread depth all the way across.
Both tires have some edge wear. No flat repairs have been done.
Asking $75 each plus shipping to lower 48 states
----------------------------------------
Last edited by rms-man; 11-07-2009 at 09:46 AM. Reason: prices dropped
10-08-2009, 09:52 PM
#2
On The Tree
Thread Starter
iTrader: (11)
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Katech Adjustable Belt Tensioner
Mileage unknown: Doesn’t wear out like stock spring tensioners.
SOLD $90 shipped
--------------------------------------------
Bridgestone Potenza RE050 RunFlats 245/45/17
Date Code 8th week of 2008
One tire has 8/32” on outer depths and 9/32” in middle.
Other tire has 7/32” on outer depths and 9/32” in middle.
Both have feathered edge wear. No flat repairs have been done.
Asking $95 each plus shipping to lower 48 states
--------------------------------------------
Y-shaped cold air intake
SOLD $50 shipped
------------------------------------------
Vortech Race BOV from A&A Kit. Includes mounting flange and silencer filter.
1k miles. Was pulled when we installed a nice and loud Tial 50mm.
Asking $145 shipped
-----------------------------------------------
Cold Fusion 10# blue nitrous bottle $115 shipped
Cold Fusion Purge noid [COLOR="blue"]$25 shipped [/COLOR
------------------------------------------
860 Brand Y-purge fitting
Asking $20 shipped
------------------------------------------------
2004 Z06 Factory Rear Diff 3.42SP
Used 50k miles and was swapped for RPM built diff. Was not leaking or whining when removed.
SOLD $660 shipped
---------------------------------------------------
1998 Corvette Factory LS1 Engine
Used 80k miles and was swapped for a iron block 408. It’s in good condition and was running fine when removed. Cyl #5 and #7 look good and this was only setup as a cam and bolt-ons package. Was never sprayed and ran 11.8’s in my vette.
Basically a shortblock, no cam. Stock crank, rods, and pistons.
SOLD $300 local
--------------------------------------------------
Mileage unknown: Doesn’t wear out like stock spring tensioners.
SOLD $90 shipped
--------------------------------------------
Bridgestone Potenza RE050 RunFlats 245/45/17
Date Code 8th week of 2008
One tire has 8/32” on outer depths and 9/32” in middle.
Other tire has 7/32” on outer depths and 9/32” in middle.
Both have feathered edge wear. No flat repairs have been done.
Asking $95 each plus shipping to lower 48 states
--------------------------------------------
Y-shaped cold air intake
SOLD $50 shipped
------------------------------------------
Vortech Race BOV from A&A Kit. Includes mounting flange and silencer filter.
1k miles. Was pulled when we installed a nice and loud Tial 50mm.
Asking $145 shipped
-----------------------------------------------
Cold Fusion 10# blue nitrous bottle $115 shipped
Cold Fusion Purge noid [COLOR="blue"]$25 shipped [/COLOR
------------------------------------------
860 Brand Y-purge fitting
Asking $20 shipped
------------------------------------------------
2004 Z06 Factory Rear Diff 3.42SP
Used 50k miles and was swapped for RPM built diff. Was not leaking or whining when removed.
SOLD $660 shipped
---------------------------------------------------
1998 Corvette Factory LS1 Engine
Used 80k miles and was swapped for a iron block 408. It’s in good condition and was running fine when removed. Cyl #5 and #7 look good and this was only setup as a cam and bolt-ons package. Was never sprayed and ran 11.8’s in my vette.
Basically a shortblock, no cam. Stock crank, rods, and pistons.
SOLD $300 local
--------------------------------------------------
Last edited by rms-man; 10-26-2009 at 10:00 PM. Reason: price drop
