FS:Ported LS1 heads, R1 cam, BMR Poly LCA's, 12 bolt gears, new Walbro fuel pump, etc
03-13-2005, 05:47 PM
#1
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Feb 2002
Location: Ft. Worth, TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
FS:Ported LS1 heads, R1 cam, BMR Poly LCA's, 12 bolt gears, new Walbro fuel pump, etc I am selling these parts to upgrade to my new setup.
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
03-14-2005, 09:38 AM
#3
Launching!
iTrader: (1)
Join Date: Jan 2005
Location: the town that killed Kennedy
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WMSuperSport
I am selling these parts to upgrade to my new setup.
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
I'll buy your TNT kit, and I'm in the DFW area.
I sent you a email and pm over in LS1.com
03-14-2005, 09:42 AM
#4
Launching!
iTrader: (1)
Join Date: Jan 2005
Location: the town that killed Kennedy
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WMSuperSport
I am selling these parts to upgrade to my new setup.
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
I have:
Ported LS1 heads. 2.02" intake valves,1.57" exhaust valves, I would consider it a 1.5-2 stage head. Milled .015". It was ported to produce high flow at WOT while maintaining proper velocity through the runners and lower RPMs. Ferrea valves, bronze guides, new rubber valve seals, and I'll throw in a brand new set of Comp 915s, which are a little better than stock but alot stronger. These heads have 2K miles at the most and are in excellent shape. A great deal for someone looking for a low priced ported set of heads. $700 O.B.O. I'll work with you.
R1 cam. Jay Johnson ran a 9.xx with this cam in a 346 and I am going bigger so I am letting it go. It has maybe 5-6K miles and is in awesome condition. I'll let it go for $250 O.B.O. Ill work with you.
BMR Fully Adjustable Chromoly silver poly/poly Lower Control Arms. I bought them from Jay Johnson and never installed them. The bushings look almost new and there are a few scratches on the paint, but you can't see the arm from a standard view anyway...$110
Moser 12 bolt 4.11 gears. 200 miles MAX and do not whine. I installed them once and took them out immediately because it's too much gear. No track time, just street fun. And moving to this gear will definitely pack a punch! $75 O.B.O.
Brand new Walbro 255l/hr high pressure fuel pump(LS1 style) with screen, hosing, clamps, instructions, wiring, seals, etc for any LS style fuel system. Never took the caps off the pump, just opened the box. Never tried to install or anything. Good as Brand New! Just won't support my fuel needs with N02. $100 O.B.O. Also negotiable...
TNT Nitrous dry 75-100-150 shot kit with two bottles ran through it. I won't be needing this anymore so it's up for grabs. Comes with everything needed, wiring, selenoids, jets, adjustable pills, lines, relay, etc. I mean this kit made my lame 320RWHP into a monster! $350 O.B.O. I'll work with you.
1 Prostar skinny(15"x3.5") with almost new tire. Chrome is in great shape. Shipping would be an issue unless you live in the DFW area. $100 O.B.O. I'll work with ya.
All prices are negotiable and may or may not include shipping. Feel free to ask questions at my email WMSuperSport@cs.com. Thanks
Wes
PM sent
Trending Topics
03-19-2005, 08:43 AM
#15
TECH Fanatic
Thread Starter
iTrader: (23)
Join Date: Feb 2002
Location: Ft. Worth, TX
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
camz383, I'm awaiting payment on the LCA's, but I'll keep you on the list.
NVR4GET, sorry no numbers on the heads
Tim98z, I use Comp 918s, they are very safe with this cam. I have a low milage set if you want to buy them.
Thanks guys,
Wes
NVR4GET, sorry no numbers on the heads
Tim98z, I use Comp 918s, they are very safe with this cam. I have a low milage set if you want to buy them.
Thanks guys,
Wes