FS: Wheels and JUNK, moving NEXT WEEK, ALL MUST GO
04-20-2005, 08:38 PM
#1
TECH Addict
Thread Starter
Join Date: Nov 2001
Location: St Louis, MO
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
FS: Wheels and JUNK, moving NEXT WEEK, ALL MUST GO I am moving and must sell this stuff FAST. All is located in Flagstaff, AZ. All emailed offers will be considered. What doesnt sell may end up trash. Must use paypal, I dont have time to take check or money order. zerohp@gmail.com
Pair of 17x9.5 Z06 Wheels.
One is a factory original GM wheel, the other is a painted aftermarket. The OEM one has curb rash. I bought these from a corvetteforum member thinking they were both OEM. Was going to use them for drag radials anyway. They are the same color, but the pictures are badly lighted. Taking a loss on this one.
$200 + shipping
Pics:
[ Large | Small ] 
[ Large | Small ]
SOLDPair of 18x9.5 Chrome Z06 Reproductions
One is in good condition, the other has been curbed. The car was hit on the drivers side and pushed into the curb.
Pair of 18x10.5 Chrome Z06 Reproductions
One is curbed, see above. The other was hit directly by another car, may be bent or damaged, chrome is chipped in one spot and flakes off. Priced accordingly.
All four, $150 + shipping
Make offer to split.
Pics:
[ Large | Small ] 
[ Large | Small ] 
[ Large | Small ] 
[ Large | Small ]
Set of four OEM 1999 Wagon wheels. Dirty but good condition.
$100 + shipping
Pics:
[ Large | Small ]
Two 265-35R18 Bridgestone S02 tires. Both tires are between 5.5/32 and 6.5/32 (inside to outside). New is 10/32.
$100 + shipping
No pics...
Two 16x8 1993 Firebird Formula wheels. I was going to use them for ET Streets some day. Ugliest wheels ever.
$50 + shipping
Pics:
[ Large | Small ]
SOLDPair of Katech ported cylinder heads, bought them used with a broke intake valve, bent exhaust valve. Needs chamber welded, ported and guides replaced at a minimum.
$100 + shipping
Pics:
[ Large | Small ] 
[ Large | Small ] 
[ Large | Small ]
1999 C5 Stock fuel rail.
$20 + shipping
No pics..
1999 C5 Torque tube parts. No bushings, center shaft warped. Input shaft and bearings good. Tube and rear bell housing good.
MAKE OFFER
Pics:
[ Large | Small ] 
[ Large | Small ]
Misc old parts. LS1 Intake, coolant tube, AIR system parts, OEM air box.
LS1 INTAKE SOLD
MAKE OFFER
Pics:
[ Large | Small ]
Pair of 17x9.5 Z06 Wheels.
One is a factory original GM wheel, the other is a painted aftermarket. The OEM one has curb rash. I bought these from a corvetteforum member thinking they were both OEM. Was going to use them for drag radials anyway. They are the same color, but the pictures are badly lighted. Taking a loss on this one.
$200 + shipping
Pics:
[ Large | Small ] [ Large | Small ]SOLDPair of 18x9.5 Chrome Z06 Reproductions
One is in good condition, the other has been curbed. The car was hit on the drivers side and pushed into the curb.
Pair of 18x10.5 Chrome Z06 Reproductions
One is curbed, see above. The other was hit directly by another car, may be bent or damaged, chrome is chipped in one spot and flakes off. Priced accordingly.
All four, $150 + shipping
Make offer to split.
Pics:
[ Large | Small ] [ Large | Small ] [ Large | Small ] [ Large | Small ]Set of four OEM 1999 Wagon wheels. Dirty but good condition.
$100 + shipping
Pics:
[ Large | Small ]Two 265-35R18 Bridgestone S02 tires. Both tires are between 5.5/32 and 6.5/32 (inside to outside). New is 10/32.
$100 + shipping
No pics...
Two 16x8 1993 Firebird Formula wheels. I was going to use them for ET Streets some day. Ugliest wheels ever.
$50 + shipping
Pics:
[ Large | Small ]SOLDPair of Katech ported cylinder heads, bought them used with a broke intake valve, bent exhaust valve. Needs chamber welded, ported and guides replaced at a minimum.
$100 + shipping
Pics:
[ Large | Small ] [ Large | Small ] [ Large | Small ]1999 C5 Stock fuel rail.
$20 + shipping
No pics..
1999 C5 Torque tube parts. No bushings, center shaft warped. Input shaft and bearings good. Tube and rear bell housing good.
MAKE OFFER
Pics:
[ Large | Small ] [ Large | Small ]Misc old parts. LS1 Intake, coolant tube, AIR system parts, OEM air box.
LS1 INTAKE SOLD
MAKE OFFER
Pics:
[ Large | Small ] Last edited by 66ImpalaLT1; 04-21-2005 at 08:03 PM.
Trending Topics
04-21-2005, 04:23 PM
#15
TECH Addict
Thread Starter
Join Date: Nov 2001
Location: St Louis, MO
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying to catch up on all the PM's. Everyone inquiring about the heads should have a reply now, but I think I told some people the wrong valve size. They are 2.02/1.57 stainless valves. Here's a closeup if I didnt send it to you.
The heads are probably sold at this point, as are the chrome Z06's. Anyone else who inquires about them will be added to the list.
The heads are probably sold at this point, as are the chrome Z06's. Anyone else who inquires about them will be added to the list.
