Snapps

iTrader: (39)

Hello all,

I am back once again with parts for sale. June 20th of this year I ordered my TSP 408 stroker motor from short block all the way to intake and TB so I have some moderately used parts some HP parts others Stock. Please feel free to do a search on my sale's.

Aftermarket:
TSP Catback Rumbler with TSP tips. Still like new but installed and ran for 500miles then bought a borla due to lowering my car. Comp Cam's double roller timing set, 921 spring kit, Comp cam, 232/234 595/598 112 on mustang dyno 407rwhp with cam,asp UD pulley LT's etc. Thunder racing harden push rod's 7.400, ls1 ported oil pump All of that has about 8-900 miles at which point I pulled my motor and bought a TSP 408 stroker with afr 225 heads.

Stock:I have my stock casting #241 Ls1 heads 24,000 miles at most. Stock short block has 24kmiles (short block comes with engine stand) , z06 clutch kit 8k miles (very easy driving miles I never once have dumped the clutch),1 ported TB by lingenfelter, 2 MAF's 1 de-screened other is screened but polished.1 snorkel type baffle for maf to TB, stock pan hard bars upper and lower, stock springs, stock WS6 shocks, Stock RamAir kit off a 2001 SS (upper and lower housing, lid with filter) .

As for the Short block I will ship threw fed ex in a very nicely made crate that will have the engine anchored down so no chances of damage occurring. Crate alone cost me $175.00



AFTERMARKET:
Comp Cam Double Roller Timing set: $100.00 Sold
Comp Cam 921 Spring Kit: $250.00
Comp Cam xer281hr-12 $200.00 SOLD
Ported Ls1 Oil pump $50.00
Thunder Racing harden push rods 7.400L Sold
TSP Catback Rumbler with TSP tips: Sold
TSP LID Black (Sensor included) $60.00 Sold

STOCK:
Stock Short block: $700.00 NOW $500.00 Sold
241LS1 Heads: $400.00 NOW $300.00
Stock Lifters with tray:$ 75.00 NOW $60.00
Z06 Clutch: $ 75.00 Sold
Ported & Polished TB (TPS included) Now $100.00 Sold
2 maf's: $40.00 a piece NOW $35.00 Both are sold
Stock Crank Pulley: $ 30.00 Sold
Pan hard bars: $40.00 Now $30.00
Stock Springs and Shocks: $40.00 springs are sold
Stock SS Ramair: $ 40.00 Make and offer
I have pictures of everything but limited to how many pic's I can upload.

Thanks

Jeff

onebad00ws6

iTrader: (2)

I'll take the cat back.

Snapps

iTrader: (39)

One bad00ws6 You have a pm which contains my paypal info

T T T

TTU98SS

iTrader: (5)

How many miles on the clutch? is it just the disk or the PP and flywheel as well? thanks - Darren

cyclerage

iTrader: (59)

I can do cam and springs if you get back to me soon.
Also MAF.

funnelone

iTrader: (8)

I will take the lid and catback if it is still avaliable.

Snapps

iTrader: (39)

At most 9k. And yes the PP,disk, flywheel, I will even throw in the used throw out bearing, and master slave. all from 01 ws6. the slave has the same amount of miles as the clutch kit. And the master is orginial. updated with drill mod done already..


cyclerage I can do cam and springs if you get back to me soon.
Also MAF.

Ok the maf is available, cam is available, but the springs are pending. I will put you in line on those but I am pretty sure the buyer want's them.

funnelone I will take the lid and catback if it is still avaliable.

Lid is available and catback is pending. I can put you in line as well for the catback. But once again I am pretty sure the buyer will take it today.

Thank you all for for you time.

Snapps

iTrader: (39)

Sale pending on the crank pulley,exhaust and the lid is sold to funnelone which he is second in line for exhaust.. As of 12:12central time 9/20/05

If some of these prices are not correct (whats others are getting on here for same parts) please don't hesitate to speak up. This is my first time selling a engine.
Thanks Jeff

Snapps

iTrader: (39)

New prices and new picture of the shortblock

TTT

Jeff

dougs99ss

iTrader: (4)

PM sent on the timing chain

blackgtp02z

iTrader: (3)

WHo did the Throttle body

LS1_SS

iTrader: (127)

Just wanted to let everyone know that Jeff (snapps) is a great guy to deal with.. Very prompt and upfront with everything..
-Nathan

Snapps

iTrader: (39)

I appreciate that.. And as well. Ls1ss has been always been prompt with the cash. And has always came threw when he said he would.. bro

Hope you enjoy the intake when it gets there tomorrow

Jeff

Snapps

iTrader: (39)

Lingenfelter performance. I have receipt's for all.

Jeff

blackgtp02z

iTrader: (3)

sorry i sent a pm before i saw this bro.

blackgtp02z

iTrader: (3)

TB is sold. Thanks again JEFF>

AWESOME SELLER everyone.

Snapps

iTrader: (39)

As well this is a stand up guy on the buying aspect. Now I just need to find some more peeps like him to buy the rest

Thanks again. And for the ppl who have purchased parts yesterday I will be PM'ing you all later tonight with Tracking #'s.

Jeff

mathdiesel

iTrader: (1)

I am very interested in the shortblock. It runs right? You just decided to step up to the mti? How much or the shortblock shipped to maryland? I am also interested in the clutch. my email is michael_mathis117@hotmail.com and my cell is 410-507-4858

Thanks,

Mike

mathdiesel

iTrader: (1)

I am very interested in the shortblock. It runs right? You just decided to step up to the mti? How much for the shortblock shipped to maryland? I am also interested in the clutch. my email is michael_mathis117@hotmail.com and my cell is 410-507-4858

Thanks,

Mike

Snapps

iTrader: (39)

Mike I went with a Texas Speed 408ci stroker motor. I had the dealer inspect the heads, shortblock and such. Everything is in perfect running order.

Thanks

Jeff