Lots of parts for sale!!
11-28-2005, 09:44 PM
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Lots of parts for sale!! ***ALL PRICES ARE PLUS SHIPPING***
1.)Strange Engineering 12-bolt- 4.10s, HD Posi, 33 spline axles, 1350 yoke, 3-channel ABS, brake backing plates installed, T/A cover. This rear was installed about 1 year ago and has about 16,000 miles on it (mostly highway). I raced it at the track one time for about 6 passes. It makes the common whine in 5th and 6th gear between 60-70mph. It is not bad at all though. No problem listening to the radio, passengers, or exhaust over it. The only "issue" with it is the originial ABS sensor had a wire break off which caused me to have to get a new sensor from Strange. The new sensor has backed out of its intended position (it threads into the top of the housing) causing it to trip the ABS INOP light for non-working rear ABS. This is as simple to fix as pulling the cover and setting it back to the proper distance from the reluctor wheel. I just haven't had the time to do this. It would be incrediably easy off the car. I need this sale to be LOCAL only or at least someone within reasonable driving distance as I need a stock, good condition, 3-channel ABS , 3.42 gear 10-bolt to put back on the car and cannot afford much downtime. I am asking $1500 plus stock rear.
2.)(2) BFG Drag Radials 255/50/16 mounted on chrome 5-spoke Camaro wheels. The tires have less than 150 miles on them and only 1 track visit with 6 passes down the 1/4. I am willing to sell these as a set or split them up. I am asking $300 for both wheels and tires, or $100 for the wheels and $200 for the tires. **S O L D**
3.)(4) 17x9.5 silver painted Z06 replica wheels wrapped in (2) 275/40/17 Yokohama ES100 tires and (2) 275/40/17 Mastercraft Avenger tires. 1 of the Yoko's has a plug/patch in it from a nail. The Yoko's have about 6,000 miles on them and the Mastercraft tires only about about 3,000 miles on them. This is another sale I need to be LOCAL as I need stock 16" camaro wheels w/proper rated tires to put back on the car with minimum downtime. I am asking $400 plus stock wheels/tires.
4.)Perfect-Fit car bra. Its only about 6 months old. I have used it twice. It is missing one of the clips, but that is easy to get around. I am asking $50.
5.)G-Force open face helmet. Black, Snell 2000 approved. I have used it once. Its just like new. I am asking $70. **SALE PENDING**
6.)Lakewood driveshaft safety loop. New, never installed. I am asking $30. **S O L D**
7.)BMR driveshaft safety loop (red). New, never installed. I am asking $40.
8.)Hurst "H" shifter ****. Asking $15 **S O L D**
9.)Hurst round black shifter ****. Has 6-speed shifter pattern engraved in white on top. Size is a little bigger than stock shifter ****. Comes with an adjustment nut to properly oreintate the shifter pattern. Asking $15 **S O L D**
10.)Whisper Lid- I installed a stock silver painted Z28 emblem on top of lid. There is a scuff on the lid just below the emblem. Otherwise, lid is in good shape. Asking $30. **S O L D**
11.)Fast Toys Ram Air- This actually was a SLP ram air duct orginally. I bought and added the FTRA extension piece (the design with the walls) and the better design air box seal. Includes the block off plate. Asking $50. **S O L D**
12.)BMR shock tower brace (black). Paint is peeling where the bolt holes are. Asking $30.
13.)Stock 2001 Y-pipe. Asking $20
14.)Stock 2001 Cats. Asking $40 for the pair. **SALE PENDING**
15.)Stock 2001 manifolds. Asking $50 for the pair.
16.)Stock 2001 PHR. Asking $10.
17.)Stock 2001 Z28 springs (front and rear). Asking $40.
18.)Stock LS1 Flywheel. Asking $50.
1.)Strange Engineering 12-bolt- 4.10s, HD Posi, 33 spline axles, 1350 yoke, 3-channel ABS, brake backing plates installed, T/A cover. This rear was installed about 1 year ago and has about 16,000 miles on it (mostly highway). I raced it at the track one time for about 6 passes. It makes the common whine in 5th and 6th gear between 60-70mph. It is not bad at all though. No problem listening to the radio, passengers, or exhaust over it. The only "issue" with it is the originial ABS sensor had a wire break off which caused me to have to get a new sensor from Strange. The new sensor has backed out of its intended position (it threads into the top of the housing) causing it to trip the ABS INOP light for non-working rear ABS. This is as simple to fix as pulling the cover and setting it back to the proper distance from the reluctor wheel. I just haven't had the time to do this. It would be incrediably easy off the car. I need this sale to be LOCAL only or at least someone within reasonable driving distance as I need a stock, good condition, 3-channel ABS , 3.42 gear 10-bolt to put back on the car and cannot afford much downtime. I am asking $1500 plus stock rear.
2.)(2) BFG Drag Radials 255/50/16 mounted on chrome 5-spoke Camaro wheels. The tires have less than 150 miles on them and only 1 track visit with 6 passes down the 1/4. I am willing to sell these as a set or split them up. I am asking $300 for both wheels and tires, or $100 for the wheels and $200 for the tires. **S O L D**
3.)(4) 17x9.5 silver painted Z06 replica wheels wrapped in (2) 275/40/17 Yokohama ES100 tires and (2) 275/40/17 Mastercraft Avenger tires. 1 of the Yoko's has a plug/patch in it from a nail. The Yoko's have about 6,000 miles on them and the Mastercraft tires only about about 3,000 miles on them. This is another sale I need to be LOCAL as I need stock 16" camaro wheels w/proper rated tires to put back on the car with minimum downtime. I am asking $400 plus stock wheels/tires.
4.)Perfect-Fit car bra. Its only about 6 months old. I have used it twice. It is missing one of the clips, but that is easy to get around. I am asking $50.
5.)G-Force open face helmet. Black, Snell 2000 approved. I have used it once. Its just like new. I am asking $70. **SALE PENDING**
6.)Lakewood driveshaft safety loop. New, never installed. I am asking $30. **S O L D**
7.)BMR driveshaft safety loop (red). New, never installed. I am asking $40.
8.)Hurst "H" shifter ****. Asking $15 **S O L D**
9.)Hurst round black shifter ****. Has 6-speed shifter pattern engraved in white on top. Size is a little bigger than stock shifter ****. Comes with an adjustment nut to properly oreintate the shifter pattern. Asking $15 **S O L D**
10.)Whisper Lid- I installed a stock silver painted Z28 emblem on top of lid. There is a scuff on the lid just below the emblem. Otherwise, lid is in good shape. Asking $30. **S O L D**
11.)Fast Toys Ram Air- This actually was a SLP ram air duct orginally. I bought and added the FTRA extension piece (the design with the walls) and the better design air box seal. Includes the block off plate. Asking $50. **S O L D**
12.)BMR shock tower brace (black). Paint is peeling where the bolt holes are. Asking $30.
13.)Stock 2001 Y-pipe. Asking $20
14.)Stock 2001 Cats. Asking $40 for the pair. **SALE PENDING**
15.)Stock 2001 manifolds. Asking $50 for the pair.
16.)Stock 2001 PHR. Asking $10.
17.)Stock 2001 Z28 springs (front and rear). Asking $40.
18.)Stock LS1 Flywheel. Asking $50.
Last edited by LightweightZ28; 12-07-2005 at 11:11 AM.
11-28-2005, 11:18 PM
#6
11-29-2005, 07:34 AM
#7
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
I will start getting pics out to you guys this evening after work. I will contact you in the order you contacted me through this post and/or PM. Thanks for the interest guys, looking forward to working out some deals.
P.S. I am selling these parts as I am about to place my car for sale.
P.S. I am selling these parts as I am about to place my car for sale.
Trending Topics
11-29-2005, 02:42 PM
#11
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
I have responded to a couple people so far but its tough right now being at work. So everyone who has replied or sent me an email, please be patient and I will get back to you ASAP. 
11-29-2005, 02:57 PM
#12
.)Hurst round black shifter ****. Has 6-speed shifter pattern engraved in white on top. Size is a little bigger than stock shifter ****. Comes with an adjustment nut to properly oreintate the shifter pattern. Asking $15 DIBS
STB if the other guys dont want it!
all i need is your info!
STB if the other guys dont want it!
all i need is your info! 
11-30-2005, 10:14 AM
#20
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys, got tied up. I have updated my original post with the latest info I have on who is interested in what and the offers I have been getting.
ds97ws6- I do not have a stock rear end. I am selling my 12-bolt for cash + stock rear end to put back on the car.
purple98haz28- The rear is still on the car. I can snap a couple pics if you want, can't promise you the quality of the shots, but I will do the best I can.
**All PM's have been replied to. If you sent me a PM and did not recieve a reply let me know and I apologize for missing it.
Thanks
ds97ws6- I do not have a stock rear end. I am selling my 12-bolt for cash + stock rear end to put back on the car.
purple98haz28- The rear is still on the car. I can snap a couple pics if you want, can't promise you the quality of the shots, but I will do the best I can.
**All PM's have been replied to. If you sent me a PM and did not recieve a reply let me know and I apologize for missing it.
Thanks
Last edited by LightweightZ28; 11-30-2005 at 10:36 AM.