Race 6L Heads, rockers, manifold, and some other parts
12-02-2005, 11:01 AM
#1
Launching!
Thread Starter
Join Date: Apr 2002
Location: Michigan
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Race 6L Heads, rockers, manifold, and some other parts I have had these parts for sale for a while now and they still have not sold. I have droped the prices down as far as I can go now, and every thing here is worth way more than the asking price.
1. Modern Cylinder Heads solid roller 6L. heads, Jesel Mohawk rocker arms, and GMPP single plane intake. The heads have been welded in the chambers, and have some epioxy(sp?) work in the runners. Heads have del west valves, and comp springs. The springs have 350lbs. on the seat, and 700lbs. open pressure. The intake has been setup for fuel injectors and will include rails, and also has nitrous bungs welded in for a fogger setup. This setup has been low 9's. The heads are fresh and not been run sience rebuild. Asking $2800. for all of it.
2. 2 Yokahama AVS Sports 295-35-18. Very little tread wear, well over half of the tread remains. The tires probably have 4,000 miles on them. $125.
3. Alston non-adjustable torque arm. Used but in good condition. Mounts to the the drive shaft tunnel, and will clear dual exhaust much better than other aftermaket torque arms. $100.
4. Trend .080 wall chromemoly 7.300 pushrods. Have very few miles. $40.
All prices do not include shipping. I usualy pay more attention to PM than Email so send messages that way.
--------------------------------------------------------------------------------
1. Modern Cylinder Heads solid roller 6L. heads, Jesel Mohawk rocker arms, and GMPP single plane intake. The heads have been welded in the chambers, and have some epioxy(sp?) work in the runners. Heads have del west valves, and comp springs. The springs have 350lbs. on the seat, and 700lbs. open pressure. The intake has been setup for fuel injectors and will include rails, and also has nitrous bungs welded in for a fogger setup. This setup has been low 9's. The heads are fresh and not been run sience rebuild. Asking $2800. for all of it.
2. 2 Yokahama AVS Sports 295-35-18. Very little tread wear, well over half of the tread remains. The tires probably have 4,000 miles on them. $125.
3. Alston non-adjustable torque arm. Used but in good condition. Mounts to the the drive shaft tunnel, and will clear dual exhaust much better than other aftermaket torque arms. $100.
4. Trend .080 wall chromemoly 7.300 pushrods. Have very few miles. $40.
All prices do not include shipping. I usualy pay more attention to PM than Email so send messages that way.
--------------------------------------------------------------------------------
Last edited by GPowrie; 12-02-2005 at 11:37 AM.
12-02-2005, 12:22 PM
#2
Launching!
Thread Starter
Join Date: Apr 2002
Location: Michigan
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
12-02-2005, 12:27 PM
#3
12-02-2005, 04:18 PM
#7
Launching!
Thread Starter
Join Date: Apr 2002
Location: Michigan
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hotrod44
stock coils,wire, stall,pulleys,intake & ex. manifold,thermostat, m.a.s all stock
