Hardcore LS1 Parts Sale - Huge Sale, Something For Everyone!!!
#1
Thread Starter
Tenured Member
iTrader: (56)
Joined: May 2004
Posts: 343
Likes: 0
From: West Suburbs of Chicago
Hardcore LS1 Parts Sale - Huge Sale, Something For Everyone!!!
Speed Inc. Built T56 6 Speed Transmission.
Street T56
Rebuilt T56 Includes the following upgrades:
New Synchro Assemblies
Carbon Fiber Blocking Rings
Viper Steel ¾ Shift Fork
Here is a link to what it is:
http://www.ls1speed.com/catagory.cf...ry=Transmission
Spec Stage 3 Clutch Assembly installed with new tranny.
This has barely been used has no more than 500 miles on both pieces. I will sell as a package or seperate depending on who wants the tranny setup.
$1400 for the tranny and the clutch setup. I will need in exchange your stock WORKING T56. Shipping can be worked out between buyer and seller.
Built Speed Inc. T56 w/out clutch $1200 + your WORKING stock T56.
Built Speed Inc. T56 outright $1800
MTI Stage 2E Heads- Heads feature 2.02"in. valve and 1.57"ex. valve. Heads have been upgraded to a Comp Cams 978 dual valve springs. These are "241" castings. These heads have not been milled to increase compression and retain the factory 67cc combustion chambers. These heads will support a LARGE cam.
These heads have been assembled with new guides and seals. They have been checked and cleaned by "AES" Automotive Engine Specialists in Elk Grove, IL. I have receipts for the work. Ready to be bolted on and GUARENTEED no problems. $1500
Here is a link to MTI for more info on the heads:
http://www.motorsporttech.com/fbody_engine01.asp
MTI C1 Hammer Cam- 222/222 .566/.566 112 lsa 1k miles on this cam. $200
With these heads and cam have put an all motor full weight stock shortblock 6-Speed LS1 F-Body to a best of 11.02@122 w/1.50 60ft.
Car made 433RWHP and 411RWTQ, peak HP was @ 6400RPM.
LS6 Intake-Includes coolant lines and plugs-SOLD
Speed Inc. HD Chromoly Nitrous Driveshaft -Stock Length. This will work for an A4 or 6speed car. - $300
Raptor Shift Light-Red in color-Sale Pending
Borla LS1 F-Body Catback - Quad Tip with plates, has a cut-out installed before the axle.-$450
Eibach Spring Pro-Kit- Front and rear springs, springs are installed on front shocks. I will need your stock front assembled shocks and rear springs in exchange.-$125
BMR Boxed control arms - w/poly bushings, black in color-Sale Pending
BMR Panhard Rod- Standard non-adjustable, black in color.-Sale Pending
BMR Adjustable Torque Arm- Model number#TA001, red in color- SOLD
Pro 5.0 Shifter- Power tower, standard legnth-$150
All parts are used unless noted, everything is in EXCELLENT condition. Shipping is not included with pricing. This is all first come first serve. Please PM me or e-mail me at gopmotorsports@yahoo.com. I do accept PayPal.
Everything listed here can be seen @ www.ls1speed.com for more details.
I will be out of town from 2/15/06-2/28/06, If payment is received by Tuesday 2/14/06 at 12pm Central your item will ship that day, if not then unfortunately I cannot take payment and/or I can ship immediately when I get back. Thanks
***On a side note, I want to be fair to everyone so please no tire kicking dreamers. Only PM me if your SERIOUSLY interested, do not waste my time for I will not waste yours.***
Thanks,
Tim
Street T56
Rebuilt T56 Includes the following upgrades:
New Synchro Assemblies
Carbon Fiber Blocking Rings
Viper Steel ¾ Shift Fork
Here is a link to what it is:
http://www.ls1speed.com/catagory.cf...ry=Transmission
Spec Stage 3 Clutch Assembly installed with new tranny.
This has barely been used has no more than 500 miles on both pieces. I will sell as a package or seperate depending on who wants the tranny setup.
$1400 for the tranny and the clutch setup. I will need in exchange your stock WORKING T56. Shipping can be worked out between buyer and seller.
Built Speed Inc. T56 w/out clutch $1200 + your WORKING stock T56.
Built Speed Inc. T56 outright $1800
MTI Stage 2E Heads- Heads feature 2.02"in. valve and 1.57"ex. valve. Heads have been upgraded to a Comp Cams 978 dual valve springs. These are "241" castings. These heads have not been milled to increase compression and retain the factory 67cc combustion chambers. These heads will support a LARGE cam.
These heads have been assembled with new guides and seals. They have been checked and cleaned by "AES" Automotive Engine Specialists in Elk Grove, IL. I have receipts for the work. Ready to be bolted on and GUARENTEED no problems. $1500
Here is a link to MTI for more info on the heads:
http://www.motorsporttech.com/fbody_engine01.asp
MTI C1 Hammer Cam- 222/222 .566/.566 112 lsa 1k miles on this cam. $200
With these heads and cam have put an all motor full weight stock shortblock 6-Speed LS1 F-Body to a best of 11.02@122 w/1.50 60ft.
Car made 433RWHP and 411RWTQ, peak HP was @ 6400RPM.
LS6 Intake-Includes coolant lines and plugs-SOLD
Speed Inc. HD Chromoly Nitrous Driveshaft -Stock Length. This will work for an A4 or 6speed car. - $300
Raptor Shift Light-Red in color-Sale Pending
Borla LS1 F-Body Catback - Quad Tip with plates, has a cut-out installed before the axle.-$450
Eibach Spring Pro-Kit- Front and rear springs, springs are installed on front shocks. I will need your stock front assembled shocks and rear springs in exchange.-$125
BMR Boxed control arms - w/poly bushings, black in color-Sale Pending
BMR Panhard Rod- Standard non-adjustable, black in color.-Sale Pending
BMR Adjustable Torque Arm- Model number#TA001, red in color- SOLD
Pro 5.0 Shifter- Power tower, standard legnth-$150
All parts are used unless noted, everything is in EXCELLENT condition. Shipping is not included with pricing. This is all first come first serve. Please PM me or e-mail me at gopmotorsports@yahoo.com. I do accept PayPal.
Everything listed here can be seen @ www.ls1speed.com for more details.
I will be out of town from 2/15/06-2/28/06, If payment is received by Tuesday 2/14/06 at 12pm Central your item will ship that day, if not then unfortunately I cannot take payment and/or I can ship immediately when I get back. Thanks
***On a side note, I want to be fair to everyone so please no tire kicking dreamers. Only PM me if your SERIOUSLY interested, do not waste my time for I will not waste yours.***
Thanks,
Tim
Last edited by Timmy2Stage; 03-01-2006 at 03:49 PM.
#2
can you plz check on shipping teh TQ arm to 74021 i have the cash now adn was going order one of these in a few days but will takes yours if shipping is not to much
also what kinda of codition is it in any pics
if so send them to
vetteracer37@***.net
also what kinda of codition is it in any pics
if so send them to
vetteracer37@***.net
#3
Thread Starter
Tenured Member
iTrader: (56)
Joined: May 2004
Posts: 343
Likes: 0
From: West Suburbs of Chicago
Originally Posted by 00MysticZ
can you plz check on shipping teh TQ arm to 74021 i have the cash now adn was going order one of these in a few days but will takes yours if shipping is not to much
also what kinda of codition is it in any pics
if so send them to
vetteracer37@***.net
also what kinda of codition is it in any pics
if so send them to
vetteracer37@***.net
I'll have it shipped to you 3 day ground by UPS. I can ship on Monday. It will cost $40. My Paypal address is gopmotorsports@yahoo.com.
Thanks,
Tim
#6
Trending Topics
#17
Thread Starter
Tenured Member
iTrader: (56)
Joined: May 2004
Posts: 343
Likes: 0
From: West Suburbs of Chicago
Originally Posted by Mike2002
Shift light available still?
If I haven't heard anything by Monday at 12pm it's still for sale.
#19
Thread Starter
Tenured Member
iTrader: (56)
Joined: May 2004
Posts: 343
Likes: 0
From: West Suburbs of Chicago
Guys I am getting ALOT of PM's!!!!
Payment in my PayPal account buys this stuff. Not your word!!!
I can't take your word and deposit that
This is first come first serve. Everyone who buys will be happy. Trust my feedback!!
Thanks,
Tim
Payment in my PayPal account buys this stuff. Not your word!!!
I can't take your word and deposit that
This is first come first serve. Everyone who buys will be happy. Trust my feedback!!
Thanks,
Tim
Last edited by Timmy2Stage; 02-12-2006 at 10:45 PM.