224 Cam for sale
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The cam in my sig...ran for one summer.5-6000 miles on it. Still in the car, parked in the garage for the winter.
I am going with a larger cam, and I hope I dont regret it, this cam is awesome.
Made GREAT POWER, no loss in low end, havent even been tuned yet and had no problems running it for the summer, but car is an m6, dont know how it would do in an A4. It will run rough for about 50 or so miles until your computer re-adjusts, after that no stalling occurs.
No dyno numbers, but I am guessing I gained AT LEAST 35rwhp from installing this cam. You will definately feel it.
Springs were used with this cam only, same amount of miles, ran perfectly no problems. Good to .600 lift. Springs and Retainers included.
Link to the kit. They are manley springs and Titanium retainers sold by sdpc.
http://www.sdpc2000.com/catalog/3629...tainer-Kit.htm
Same exact kit, bought from same place.
Check my feedback, I am not a scammer...car runs perfectly with the cam/springs.If and when I pull the parts out and for some reason they are damaged....I will refund your money no questions asked. My ebay ID is rombyertroyj....I have something like 35 feedback, and 100% positive. No need to worry.
I am open to reasonable offers. Will pull the cam/springs once I receive payment, need some money for my new cam so I am trying to sell this one first.
I take paypal, money order, cashiers check
thanks
I am going with a larger cam, and I hope I dont regret it, this cam is awesome.
Made GREAT POWER, no loss in low end, havent even been tuned yet and had no problems running it for the summer, but car is an m6, dont know how it would do in an A4. It will run rough for about 50 or so miles until your computer re-adjusts, after that no stalling occurs.
No dyno numbers, but I am guessing I gained AT LEAST 35rwhp from installing this cam. You will definately feel it.
Springs were used with this cam only, same amount of miles, ran perfectly no problems. Good to .600 lift. Springs and Retainers included.
Link to the kit. They are manley springs and Titanium retainers sold by sdpc.
http://www.sdpc2000.com/catalog/3629...tainer-Kit.htm
Same exact kit, bought from same place.
Check my feedback, I am not a scammer...car runs perfectly with the cam/springs.If and when I pull the parts out and for some reason they are damaged....I will refund your money no questions asked. My ebay ID is rombyertroyj....I have something like 35 feedback, and 100% positive. No need to worry.
I am open to reasonable offers. Will pull the cam/springs once I receive payment, need some money for my new cam so I am trying to sell this one first.
I take paypal, money order, cashiers check
thanks
Last edited by UltraZLS1; 03-25-2006 at 06:20 PM.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The springs/titanium retainers were $245.00 plus shipping when bought new.
The cam was $350.00 plus shipping when bought new.
The cam and springs have approximately 5-6k on them, ran for one summer.
I am just taking offers right now...make me one and maybe we can work something out.
BLWN1....I noticed in your parts wanted add you were looking for an ls1 intake also, I can sell you mine, but it doesnt come with anything but the intake/gaskets.
Troy
The cam was $350.00 plus shipping when bought new.
The cam and springs have approximately 5-6k on them, ran for one summer.
I am just taking offers right now...make me one and maybe we can work something out.
BLWN1....I noticed in your parts wanted add you were looking for an ls1 intake also, I can sell you mine, but it doesnt come with anything but the intake/gaskets.
Troy
Last edited by UltraZLS1; 03-25-2006 at 07:50 PM.
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Full cam specs in case anyone wanted more besides what is in my sig...
Gross lift- Intake= .563 Exhaust= .563
Lobe lift Intake= .3310 Exhaust= .3310
Duration at .050 intake= 224 exhaust= 224
Duration at .006 Intake= 277 Exhaust= 277
Lobe separation 112.0
No advance ground in
Gross lift- Intake= .563 Exhaust= .563
Lobe lift Intake= .3310 Exhaust= .3310
Duration at .050 intake= 224 exhaust= 224
Duration at .006 Intake= 277 Exhaust= 277
Lobe separation 112.0
No advance ground in
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This cam uses xe lobes and the thunder cam uses xe-r lobes. XE-R lobes have a faster ramp rate which produce slightly better numbers
The tr224 cam might make 5 horsepower more....but is harder on the valvetrain. Some people think (including me) that xe lobes sound better.
AND....you could get this for a lot cheaper
The tr224 cam might make 5 horsepower more....but is harder on the valvetrain. Some people think (including me) that xe lobes sound better.
AND....you could get this for a lot cheaper
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Trending Topics
#9
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well I was just gonna take some offers...but oh well here it goes.
Ill do $225.00 shipped on the cam
Ill do $150.00 shipped on the springs/retainers.
If someone wants to take the cam AND the springs I will make them a deal and do $350.00 shipped.
This stuff would cost you over $600.00 new.
No sound clips....sorry. Its on a 112lsa...it lopes quite well.
Ill do $225.00 shipped on the cam
Ill do $150.00 shipped on the springs/retainers.
If someone wants to take the cam AND the springs I will make them a deal and do $350.00 shipped.
This stuff would cost you over $600.00 new.
No sound clips....sorry. Its on a 112lsa...it lopes quite well.
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by UltraZLS1
The springs/titanium retainers were $245.00 plus shipping when bought new.
The cam was $350.00 plus shipping when bought new.
The cam and springs have approximately 5-6k on them, ran for one summer.
I am just taking offers right now...make me one and maybe we can work something out.
BLWN1....I noticed in your parts wanted add you were looking for an ls1 intake also, I can sell you mine, but it doesnt come with anything but the intake/gaskets.
Troy
The cam was $350.00 plus shipping when bought new.
The cam and springs have approximately 5-6k on them, ran for one summer.
I am just taking offers right now...make me one and maybe we can work something out.
BLWN1....I noticed in your parts wanted add you were looking for an ls1 intake also, I can sell you mine, but it doesnt come with anything but the intake/gaskets.
Troy
I found an intake, then sold it, I need a carb style.... shoot me bottom dollar on this stuff, I am looking for some noise...
![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)