Heads & Cam FS
Heads & Cam FS I have a comp cams 234/234 598/598 110 +2 cam for sale. I ran this cam for about 4000 miles and it is still in great shape. Requires aftermarket or flycut pistons. $160 shipped
Patroit Stage 3 heads (2.08/1.60/64cc) gold springs. Ran these with the cam above. $850 shipped
ARP head studs used on above combo $160 shipped
Together this combo made 440RWHP on a 348
I will ship anywhere in the lower 48.
Patroit Stage 3 heads (2.08/1.60/64cc) gold springs. Ran these with the cam above. $850 shipped
ARP head studs used on above combo $160 shipped
Together this combo made 440RWHP on a 348
I will ship anywhere in the lower 48.
Last edited by Z06kern; May 30, 2006 at 04:42 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by drkbluls1
just got off the phone with comp, wont clear!!!! grrr!!! I always think too big....
I'm saying that this cam will not work with stock pistons. They will have to be notched or use aftermarket pistons with reliefs. It will work with any LS head. Also, I'm basing what I'm saying off the post above were darkbluls1 said he called comp and they said it would not fit. I don't know this for a fact.
I was running the cam with the heads above and 2cc relief pistons and had a lot of clearance. I don't know if it will fit with a stock bottom end. It will have to be checked!
I was running the cam with the heads above and 2cc relief pistons and had a lot of clearance. I don't know if it will fit with a stock bottom end. It will have to be checked!
