Detroitmuscle

iTrader: (16)

LPE GT2-3 cam used approximatly 6K miles
LS6 springs (yellow ones) 3K miles
Comp cams hardened 7.425" pushrods 3K miles

I'd like to sell these three as a package for $300. These pushrods are the required size for stock heads. This cam should run fine on a stock tune, and has a idle that is very stock sounding.

Trend 7.300" pushrods used 3K miles
$60

If for some reason you want some of the parts seperate let me know and we can work something out.

Detroitmuscle

iTrader: (16)

Here are pics of the cam, I can take others upon request.

WHPLASH

iTrader: (22)

TTT for you. $300 is a great price for this cam,springs and pushrods. Should go quick.

bowtieman81

iTrader: (35)

the turbo guys would be interested in this i bet, you might put a link to the ad in that section.

Detroitmuscle

iTrader: (16)

thanks guys.

GTO_Scott

iTrader: (3)

How much for just the pushrods? We're putting together a used S-Cam setup for a 2005 GTO guy and he needs pushrods. I think the S-cam has the smaller baseline and he could use your 7.425s

ChaseSS

iTrader: (17)

did you have any dyno numbers with this cam? or are the numbers in your sig the numbers for the heads/cam package you have now?

Detroitmuscle

iTrader: (16)

$50 for the pushrods but I'm going to wait a day or two to see if anyone takes it all, if not I may have a buyer for the cam already and I will seperate.

Gregg1LE

iTrader: (5)

Does this cam require longer than stock pushrods?

burgers

iTrader: (77)

I would go $250 shipped.

Detroitmuscle

iTrader: (16)

The numbers from this cam were 345/300 unlocked on a Mustang dyno that tends to read low numbers and this was with everything in my sig minus the MS3. I ran a best of 12.55 at 114 with this setup and it obiviously had much more potential looking at the mph. I could never hook though and that run was on a 2.0 60'

You'll need to run 7.425" pushrods with this cam and those are slightly bigger than the stockers.

Gregg1LE

iTrader: (5)

I sent Ed @ LPE an email before you responded and he said to use the stock 7.4 pushrods......now I'm really confused

Detroitmuscle

iTrader: (16)

These are the pushrods that come with the package LPE sells, I'd rather have hardened anyways but I supposed either could work.

Gregg1LE

iTrader: (5)

I meant stock size...I would never change a cam without hardened pushrods and better springs

1SlowHoe

iTrader: (27)

GT2-3 cam sold??

Detroitmuscle

iTrader: (16)

Sorry forgot to update Cam, springs, and pushrods are sold.