stock stuff-5.3 shortblock/5.7 block & crank/317 & 853 heads, 5.3 intake & MORE......
#1
stock stuff-5.3 shortblock/5.7 block & crank/317 & 853 heads, 5.3 intake & MORE......
hey Guys/Gals........All prices are best offer.......
i took this stuff in as partial trade from a member on here about 8 months ago. i do not remeber the users name so i cannot get back in touch with him to find out mileage, i just know he's a TX member who drove up for my 427sbc race motor. if he happens to chime in i'll get some info.
i'm not sure what to ask for this stuff as i've never bought or sold stock stuff before, but here goes.......
*added.....i have 2 used "poly seat" seat covers i just picked up as a pkg deal with seats & brackets. they are in very-very good shape, however they are slightly different from each other. one is plain black while the other has the JAZ logo just below the headrest area. they are probably about $35 each like the Jeg's ones. [COLOR=Blue]i'd like $20 each or $30 for the pair.[/COLOR]SOLD!
317 heads, complete and look great......$150 + shipping. SOLD!
853 heads, same as above.....66.67cc chambers.......$125 + shipping. SOLD!
stock rockers still bolted on the 853 heads.......$40 + shipping. SOLD!
stock ?xxxxx? mileage 5.3 shortblock with valley cover & knock sensors, front covers still in place (so is timing set & cam) rear cover, balancer/pulley, flexplate, cam sensor, motor mounts, oil pan & sensor..........I can turn the motor over by hand with the 853 heads bolted on and hear the compression leakdown after every little movement/turn of the crank. it's not at all easy to turn, but i'm not using anything but my bare hands so i'm 100% sure it's at least not a siezed motor......$350 + shipping. SOLD!
stock pushrods & lifters from 5.3.........$50 or $30 each + shipping. SOLD!
5.7 bare block with a very mild appearing/barely noticeable spun rod bearing issue. i was told that he had it looked at and was told by a machine shop that it would not be a problem, but then he ended up buying my race motor...........$400 shipped.
stock valve covers.......$20 + shipping. SOLD!
coil packs & brackets............best offer. SOLD!
stock 5.3 truck intake manifold complete with T-body, fuel rails, & injectors......best offer for now but checking up on reasonable price. SOLD!
Paypal is accepted with 3% fee.......
I'm just looking to make up what i lost on the race motor sale. let me knowwhat you're interested in.
Thanks,
Dave
i took this stuff in as partial trade from a member on here about 8 months ago. i do not remeber the users name so i cannot get back in touch with him to find out mileage, i just know he's a TX member who drove up for my 427sbc race motor. if he happens to chime in i'll get some info.
i'm not sure what to ask for this stuff as i've never bought or sold stock stuff before, but here goes.......
*added.....i have 2 used "poly seat" seat covers i just picked up as a pkg deal with seats & brackets. they are in very-very good shape, however they are slightly different from each other. one is plain black while the other has the JAZ logo just below the headrest area. they are probably about $35 each like the Jeg's ones. [COLOR=Blue]i'd like $20 each or $30 for the pair.[/COLOR]SOLD!
317 heads, complete and look great......$150 + shipping. SOLD!
853 heads, same as above.....66.67cc chambers.......$125 + shipping. SOLD!
stock rockers still bolted on the 853 heads.......$40 + shipping. SOLD!
stock ?xxxxx? mileage 5.3 shortblock with valley cover & knock sensors, front covers still in place (so is timing set & cam) rear cover, balancer/pulley, flexplate, cam sensor, motor mounts, oil pan & sensor..........I can turn the motor over by hand with the 853 heads bolted on and hear the compression leakdown after every little movement/turn of the crank. it's not at all easy to turn, but i'm not using anything but my bare hands so i'm 100% sure it's at least not a siezed motor......$350 + shipping. SOLD!
stock pushrods & lifters from 5.3.........$50 or $30 each + shipping. SOLD!
5.7 bare block with a very mild appearing/barely noticeable spun rod bearing issue. i was told that he had it looked at and was told by a machine shop that it would not be a problem, but then he ended up buying my race motor...........$400 shipped.
stock valve covers.......$20 + shipping. SOLD!
coil packs & brackets............best offer. SOLD!
stock 5.3 truck intake manifold complete with T-body, fuel rails, & injectors......best offer for now but checking up on reasonable price. SOLD!
Paypal is accepted with 3% fee.......
I'm just looking to make up what i lost on the race motor sale. let me knowwhat you're interested in.
Thanks,
Dave
Last edited by PRAY HRD; 11-30-2006 at 06:51 PM.