400 ci. sb2.2 short block, sb2 cnc block
#1
On The Tree
Thread Starter
iTrader: (71)
Join Date: Aug 2005
Location: Michigan
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
400 ci. sb2.2 short block, sb2 cnc block
This is a 400 ci. sb2.2 short block for sale.
The block is a sb2 cnc block is still a 4.125 bore and 9.025 deck height, was brand new this season. dry sump only
cola 3.75 stoke crank
diamond 4.125 bore pistons 1.5 mil, 1.5 mil, 3 mil file fit rings
howards 6 inch billet rods with .866 small end and bolt upgrade
callico coated bearings
since i will not be able to use the camshafts in another block due to the sb2 lifter bore config. i have 3 camshafts to go with this
crower sb2 .874 lifters and trend push rods will also go with
has a 5 stage stainless steel dry sump pan, (very nice piece)
compression is 15.83 to 1 with 42cc heads.
motor has only 21 passes on it
best pass so far was 8.60 at 157 naturally asperated @ 2980 lbs with c14
the block alone costs $6300 from gmpp. no pictures to post because motor is still in car. trying to guage interest, if some one is interested they can come and take a look,i will pull engine( LOCATE IN ROSEVILLE,MI). if it does not sell i will stay with this combo for next year. asking $4500
If you need more info on anything let me know, Thanks for lookn
The block is a sb2 cnc block is still a 4.125 bore and 9.025 deck height, was brand new this season. dry sump only
cola 3.75 stoke crank
diamond 4.125 bore pistons 1.5 mil, 1.5 mil, 3 mil file fit rings
howards 6 inch billet rods with .866 small end and bolt upgrade
callico coated bearings
since i will not be able to use the camshafts in another block due to the sb2 lifter bore config. i have 3 camshafts to go with this
crower sb2 .874 lifters and trend push rods will also go with
has a 5 stage stainless steel dry sump pan, (very nice piece)
compression is 15.83 to 1 with 42cc heads.
motor has only 21 passes on it
best pass so far was 8.60 at 157 naturally asperated @ 2980 lbs with c14
the block alone costs $6300 from gmpp. no pictures to post because motor is still in car. trying to guage interest, if some one is interested they can come and take a look,i will pull engine( LOCATE IN ROSEVILLE,MI). if it does not sell i will stay with this combo for next year. asking $4500
If you need more info on anything let me know, Thanks for lookn
Last edited by revlimiter; 01-26-2007 at 11:55 PM.
#4
On The Tree
Thread Starter
iTrader: (71)
Join Date: Aug 2005
Location: Michigan
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sickss228
What kind of head and valvetrain setup were you running?
Heads were SB2.2 with jesel rocker setup done by HRD ..
Gixster, i dont really want to sell the top end..have too much money tied up into the heads and intake. Im switching to an aluminum block with more cubic inches, the only reason im selling this one. thanks