OFFICIAL! 1995 z28 part out. COMPLETE GOLD MINE!
06-05-2007, 12:02 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
FOR SALE '95 383 Stroker inside!!! Check it out!!! 383ci stroker: less than 8,000 miles.
Internally balanced, blueprinted, decked/Bored .030 over lt-1 block
ARP bolts/studs used where applicable
Eagle 4340 internally balanced crank
Eagle "h" beam connecting rods
Comp Cams high energy hydraulic lifters
Comp Cams 1.6 roller rocker
Comp Cams chromemoly pushrods
Cloyes double roller timing chain
Wiseco dish pistons/ring kit with floating wrist pins
Comp Cam custom 230/244 cam .580 lift w/114
lobe seperation
setup for roughly 10/10.5-1 compression
NGK TR-55 plugs
MSD 8.5 wires
New vented '95 opti spark
Mellings high volume oil pump
Intake
ported and polished lt-1 intake(to match heads and throttle body)
BBK 58mm throttle body
Throttle body coolant bypass
ported and polished lt-1 heads with Ferrea valves, guides, retainers
AFR Hydra rev kit
AERO adjustable fuel pressure regulator
EGR delete
Ford 30lb injectors
SLP CAI
Hooker headers
PUTS 400hp to the rear wheels.
$5000
Internally balanced, blueprinted, decked/Bored .030 over lt-1 block
ARP bolts/studs used where applicable
Eagle 4340 internally balanced crank
Eagle "h" beam connecting rods
Comp Cams high energy hydraulic lifters
Comp Cams 1.6 roller rocker
Comp Cams chromemoly pushrods
Cloyes double roller timing chain
Wiseco dish pistons/ring kit with floating wrist pins
Comp Cam custom 230/244 cam .580 lift w/114
lobe seperation
setup for roughly 10/10.5-1 compression
NGK TR-55 plugs
MSD 8.5 wires
New vented '95 opti spark
Mellings high volume oil pump
Intake
ported and polished lt-1 intake(to match heads and throttle body)
BBK 58mm throttle body
Throttle body coolant bypass
ported and polished lt-1 heads with Ferrea valves, guides, retainers
AFR Hydra rev kit
AERO adjustable fuel pressure regulator
EGR delete
Ford 30lb injectors
SLP CAI
Hooker headers
PUTS 400hp to the rear wheels.
$5000
Last edited by 95 Camaro Z28; 07-05-2007 at 11:05 AM.
06-05-2007, 12:21 PM
#3
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
nothing goes still the motor goes. but lowest ill go on the spoiler is 260. sold it onces for that already but i backed out. so thats bottom dollar on that.
if you find me a buyer for the motor and tranny you can have the spoiler for free
if you find me a buyer for the motor and tranny you can have the spoiler for free
06-05-2007, 12:44 PM
#5
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
someone has dibs on the kmember right now on cz28.com. but the buyer of the motor has 1st initial dibs on everything i got.
no pictures of the k member at this time but i can get them once the motor is being taken out.
no pictures of the k member at this time but i can get them once the motor is being taken out.
06-05-2007, 12:53 PM
#7
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
sounds good. people are pm'ing me like crazy its just too bad this motor needs to go 1st lol i wont be stuck with no car parts but a motor lol.
once that sells i can get this local beater im looking at and then the flood gate of parts will open
once that sells i can get this local beater im looking at and then the flood gate of parts will open
Trending Topics
06-05-2007, 01:01 PM
#8
On The Tree
Join Date: Apr 2005
Location: Carlisle, PA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
It's a decent price for everything including the engine managment system.
Hell, I had 3400 in my shortblock alone.
It may take some time to find some one with the cash but I don't think you'll have a problem selling it.
Hell, I had 3400 in my shortblock alone.
It may take some time to find some one with the cash but I don't think you'll have a problem selling it.
06-05-2007, 01:12 PM
#10
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CatchinZs
It's a decent price for everything including the engine managment system.
Hell, I had 3400 in my shortblock alone.
It may take some time to find some one with the cash but I don't think you'll have a problem selling it.
Hell, I had 3400 in my shortblock alone.
It may take some time to find some one with the cash but I don't think you'll have a problem selling it.
and i will take credit cards via paypal as long as they kick in the 3% fee too, so if someone needs to use a few credit cards in addition to cash it can be done.
06-05-2007, 03:04 PM
#17
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Wheels have had dibs on them for a little bit.
I would sell the posi unit out of the rear but not till further down the line obviously and i can get a shipping quote once i cross that bridge.
as for the headers, if the motor buyer does not want them..which i dont see why they wouldnt, then 150 plus shipping. they are in great shape, 7k miles on them.
I would sell the posi unit out of the rear but not till further down the line obviously and i can get a shipping quote once i cross that bridge.
as for the headers, if the motor buyer does not want them..which i dont see why they wouldnt, then 150 plus shipping. they are in great shape, 7k miles on them.
06-05-2007, 11:17 PM
#18
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
im getting completely flooded with people wanting to cash in on these good prices but i cant do anything without this badass motor sold! anyone who helps me get a buyer will get a discount on anything they want!! i want to start sending people all the parts they want but nobody has expressed any interested in this motor.
06-06-2007, 07:06 AM
#20
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Chicagoland
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I couldnt sell them at that time. I had no wheels to put on my car if i sold those rims. I decided it was a better move to just hold on to them a little longer till i decided to do a full part out. Not to mention you were not the first one interested in them, there were many before you who wanted the rims so i dont see how you can make these claims. When you like, 9th in line for some rims your not guaranteed anything.