Low mile, Strong, LS2 402/l92 stroker for sale -cheap
08-27-2007, 08:37 PM
#1
Low mile, Strong, LS2 402/l92 stroker for sale -cheap I bought this motor SDPC LS2 402 this spring and have driven less than 1,800 miles. Engine made 496/475 RWHP/TQ and runs as new with 0 issues or differences from new.
My 441 build is underway so it is time to make room. I will leave this engine in the car so it can be driven or tested until it is sold. No excuses related to this motor!
Spring 07 build with all new parts:
From SDPC
LS2 Short Block Parts List Dish -12cc
QTY Part Description Manufacturer Part Number
1 Block GM 12568950
2 Bell Housing Dowels GM 1453658
4 Head Dowels GM 12570326
10 Main Bolts GM 12556127
1 Cam Bearings DURABOND CH23
1 Drain Plug (LF) GM 12561663
1 Dumbell Plug (Rear) GM 12573460
1 Oil Plug (LF) GM 9427693
3 Drain Plug GM 11588949
1 Main Bearings CLEVITE MS2199H
1 Crank EAGLE 434640006100
1 Crank Key GM 12561513
1 Connecting Rods SCAT 6612521
8 Rod Bearings CLEVITE CB663H
1 Pistons Mahle LS1105000I12
1 Piston Rings Mahle MAH4005MS15
1 Timing Set dual row SDPC 7245
1 Front Cover GM 12596023
1 Timing Chain Dampener GM 12588670
1 Valley Cover GM 12570471
4 Lifter Guide GM 12595365
4 Lifter Guide Bolt GM 12551163
Cometic .045 head gaskets
ARP head bolts
Custom designed Comp 238-242/605-610/113 cam
Wegner Automotive CNC ported L92 heads with 5 angle valve job, milled 0.40 11.25 CR.
Patriot Gold spring kit shimmed .060 to 1.80 installed heights.
Broken in with Shell Rotella and GM EOS. Currently ready for 4th oil change.
Always preoiled with A-Sump.
Pictures, videos, cam card, flow sheets, dyno sheets, etc available.
Sold preferably as long block without intake, crank pulley, knock sensors, or pan.
Includes copy of custom tune.
$4950 + actual shipping via my commercial rate FedEx LTL account or pick up in Green Bay WI.
Bruce SOLD 8/28
Meltn@new.rr.com
My 441 build is underway so it is time to make room. I will leave this engine in the car so it can be driven or tested until it is sold. No excuses related to this motor!
Spring 07 build with all new parts:
From SDPC
LS2 Short Block Parts List Dish -12cc
QTY Part Description Manufacturer Part Number
1 Block GM 12568950
2 Bell Housing Dowels GM 1453658
4 Head Dowels GM 12570326
10 Main Bolts GM 12556127
1 Cam Bearings DURABOND CH23
1 Drain Plug (LF) GM 12561663
1 Dumbell Plug (Rear) GM 12573460
1 Oil Plug (LF) GM 9427693
3 Drain Plug GM 11588949
1 Main Bearings CLEVITE MS2199H
1 Crank EAGLE 434640006100
1 Crank Key GM 12561513
1 Connecting Rods SCAT 6612521
8 Rod Bearings CLEVITE CB663H
1 Pistons Mahle LS1105000I12
1 Piston Rings Mahle MAH4005MS15
1 Timing Set dual row SDPC 7245
1 Front Cover GM 12596023
1 Timing Chain Dampener GM 12588670
1 Valley Cover GM 12570471
4 Lifter Guide GM 12595365
4 Lifter Guide Bolt GM 12551163
Cometic .045 head gaskets
ARP head bolts
Custom designed Comp 238-242/605-610/113 cam
Wegner Automotive CNC ported L92 heads with 5 angle valve job, milled 0.40 11.25 CR.
Patriot Gold spring kit shimmed .060 to 1.80 installed heights.
Broken in with Shell Rotella and GM EOS. Currently ready for 4th oil change.
Always preoiled with A-Sump.
Pictures, videos, cam card, flow sheets, dyno sheets, etc available.
Sold preferably as long block without intake, crank pulley, knock sensors, or pan.
Includes copy of custom tune.
$4950 + actual shipping via my commercial rate FedEx LTL account or pick up in Green Bay WI.
Bruce SOLD 8/28
Meltn@new.rr.com
Last edited by See5; 08-28-2007 at 12:54 PM.
08-28-2007, 09:52 AM
#6
WOW! That's a steal!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
