FS: FLP Stage 3 heads
09-02-2007, 10:45 AM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Rockville, VA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
FS: FLP Stage 3 heads Bought these in Februrary 2007 from ZO-SICK. Awesome heads, I got a great deal, but have since decide to go with a supercharged application, so the raised compression on these guys will hurt, not help. Heads are assembled with everything other than rockers. These have been sitting in the box in my parts room since I received them in mid February 2007. Only removed from packing material to take pictures then put right back.
Full details are in his original thread (Click here). I have copied most of the information below.
** NOTE: I only bought the heads, he may still have the cam mentioned for sale, but this is for the assembled HEADS ONLY **
I paid $1648 shipped and paypal fees. Will let go for $1300 (was $1600) shipped (lower 48). Please add 3% if using paypal ($1339 (was $1648) total). I prefer paypal, but will entertain cashier's check/MO. Please POST, not PM questions/interest.
I'm in central VA, willing to knock off $100 for local pickup / delivery as far as Norfolk/Hampton/Va Beach, Northern VA, JMU, Tech, Radford, UVA, Lynchburg areas.
Things I would consider in trade (plus cash):
* Tow behind car trailer (open or solid deck)
* DPMS Panther LR-308 AR-10 Rifle w/ A3 upper, 18"+ bull barrel
No longer looking for stereo equipment - have acquired everything I needed/still want. No longer looking for non-pop up lights or Kenne Bell hood as I have purchased both.
Added pictures (click on the picture to zoom in):
Full details are in his original thread (Click here). I have copied most of the information below.
** NOTE: I only bought the heads, he may still have the cam mentioned for sale, but this is for the assembled HEADS ONLY **
I paid $1648 shipped and paypal fees. Will let go for $1300 (was $1600) shipped (lower 48). Please add 3% if using paypal ($1339 (was $1648) total). I prefer paypal, but will entertain cashier's check/MO. Please POST, not PM questions/interest.
I'm in central VA, willing to knock off $100 for local pickup / delivery as far as Norfolk/Hampton/Va Beach, Northern VA, JMU, Tech, Radford, UVA, Lynchburg areas.
Things I would consider in trade (plus cash):
* Tow behind car trailer (open or solid deck)
* DPMS Panther LR-308 AR-10 Rifle w/ A3 upper, 18"+ bull barrel
No longer looking for stereo equipment - have acquired everything I needed/still want. No longer looking for non-pop up lights or Kenne Bell hood as I have purchased both.
Originally Posted by ZO-SICK
These are like new. The heads have 3K miles and the Cam 1K. The Spec Stage 5 and Billet Steel Flywheel have about 1K. The Oil Pump is ported. I had the car apart and have swapped parts to get it ready for TT...
The heads are 61CC and should take a stock compression motor to anywhere between 10.5:1 to 11.2 :1 depending on what gaskets are used and what motor it's going on... These heads cost 3,000 with the milling and 45 degree valve job. All the work was done by some of the best in the country... Cam is a custom grind and sounds absolutely sick... 244/248 617/647 114 + 4 LSA. This cam won the MEANEST IDLE contest at the 2006 ZO6 FEST.
This combo made 525 RWHP on a 427 on 93 Octane.
Here's a link to the heads with more info on them:
https://www.flp2win.com/store/produc...c37c1420799e51
The heads are the LS6 Stage III with SS Valves 2.10 int. 1.60 exh.
The springs are the ones that FLP uses and I'm not sure exactly what they are, but I know they are high quality. I can call and ask them. Here's the link
https://www.flp2win.com/store/produc...ff774d339fb2b1
The heads are 61CC and should take a stock compression motor to anywhere between 10.5:1 to 11.2 :1 depending on what gaskets are used and what motor it's going on... These heads cost 3,000 with the milling and 45 degree valve job. All the work was done by some of the best in the country... Cam is a custom grind and sounds absolutely sick... 244/248 617/647 114 + 4 LSA. This cam won the MEANEST IDLE contest at the 2006 ZO6 FEST.
This combo made 525 RWHP on a 427 on 93 Octane.
Here's a link to the heads with more info on them:
https://www.flp2win.com/store/produc...c37c1420799e51
The heads are the LS6 Stage III with SS Valves 2.10 int. 1.60 exh.
The springs are the ones that FLP uses and I'm not sure exactly what they are, but I know they are high quality. I can call and ask them. Here's the link
https://www.flp2win.com/store/produc...ff774d339fb2b1
Last edited by dsaxman; 03-23-2008 at 02:19 PM. Reason: updated prices and trade info
09-06-2007, 10:48 PM
#4
TECH Fanatic
iTrader: (9)
Join Date: Nov 2005
Location: Mass
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
so your selling the heads and cam for 1600 bucks? let me know thanks
** NOTE: I only bought the heads, he may still have the cam mentioned for sale, but this is for the assembled HEADS ONLY **
09-07-2007, 10:35 AM
#5
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Rockville, VA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by massls1guy
nope:
** NOTE: I only bought the heads, he may still have the cam mentioned for sale, but this is for the assembled HEADS ONLY **
** NOTE: I only bought the heads, he may still have the cam mentioned for sale, but this is for the assembled HEADS ONLY **
