FS: 243 ls2/ls6 heads, 921 springs, Comp push rods, spring tool
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Turlock, CA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
FS: 243 ls2/ls6 heads, 921 springs, Comp push rods, spring tool
I just installed a complete LGM cam kit which included 921 springs, Ti retainers, seats, etc. along with hardened Comp push rods. Shortly thereafter the Felpro 1041 head gaskets began leaking oil (they neglected to send any instructions indicating that these gaskets need to be heat cycled and retorqued 3 + times). Anyway, since I'm pulling the heads I decided to go with TFS. Thus, all these parts have less than 200 miles on them (except the heads which have ~17k miles).
243 castings with 921 spring kit installed 650.00 shipped or will seperate springs/heads
250.00 shipped for spring kit and 400 for heads if seperated.
Comp Chrome Moly Pushrods 70.00
Stock rockers SOLD
Crane dual valve spring installation tool SOLD
243 castings with 921 spring kit installed 650.00 shipped or will seperate springs/heads
250.00 shipped for spring kit and 400 for heads if seperated.
Comp Chrome Moly Pushrods 70.00
Stock rockers SOLD
Crane dual valve spring installation tool SOLD
Last edited by cfi_luz; 09-12-2007 at 07:13 PM.
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Turlock, CA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Prices include shipping on all items but the heads. Thorny, thanks for the PM, let me talk with the tuner tonight so I can see where everything is at (timelines, etc.) and I'll get back with you soon. Thanks
Trending Topics
#12
On The Tree
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Turlock, CA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mike, replied to your PM. 921's are rated fairly conservatively to .630 lift, but many run them to .650 without problem. Let me know if you are interested in the springs or heads, I'll cut you a good deal to get them out of the garage .