FS: Jesel rockers for ET LS7 heads
#1
Thread Starter
TECH Junkie
iTrader: (9)
Joined: Dec 2001
Posts: 3,326
Likes: 0
Received 0 Likes
on
0 Posts
From: WA
FS: Jesel rockers for ET LS7 heads
Less than 500 miles on these rockers. Used for testing purposes only on ETP LS7 heads.
These are the Pro-Series shaft rockers designed for use with 4.100" bore ET Performance LS7 heads. They are 1.7:1 ratio on intake and exhaust (not 1.8:1 like the OEM LS7 rockers). "ARP2000" material marked on shaft retention bolts. MoHawk center beam rocker body design.
Part number information is as follows:
Rocker # is 331S70
Bar # is STN 20295
Kit # is KPS295109
This set is complete and in as-new condition (save for number/letter markings). No grinding has been done on these.
$1000 shipped anywhere in the 48 states.
No trades. Paypal only please. PM me if interested.
- Joe
EDIT: added part # info
These are the Pro-Series shaft rockers designed for use with 4.100" bore ET Performance LS7 heads. They are 1.7:1 ratio on intake and exhaust (not 1.8:1 like the OEM LS7 rockers). "ARP2000" material marked on shaft retention bolts. MoHawk center beam rocker body design.
Part number information is as follows:
Rocker # is 331S70
Bar # is STN 20295
Kit # is KPS295109
This set is complete and in as-new condition (save for number/letter markings). No grinding has been done on these.
$1000 shipped anywhere in the 48 states.
No trades. Paypal only please. PM me if interested.
- Joe
EDIT: added part # info
Last edited by Fulton 1; 09-21-2007 at 01:03 PM.
#4
Thread Starter
TECH Junkie
iTrader: (9)
Joined: Dec 2001
Posts: 3,326
Likes: 0
Received 0 Likes
on
0 Posts
From: WA
Since I've received a few questions on the specific part info, I've edited the original post with all of the part numbers that I have.
Also, please note that these are 1.7:1 ratio, not 1.8:1 as is used on the OEM LS7 rockers and, as such, should be used in conjunction with a cam ground for the 1.7:1 ratio.
Also, please note that these are 1.7:1 ratio, not 1.8:1 as is used on the OEM LS7 rockers and, as such, should be used in conjunction with a cam ground for the 1.7:1 ratio.