LS1 Stuff for sale *Motor, Tranny, machined 408 block, hood, exhaust, etc etc*
09-16-2007, 07:07 PM
#1
***LOOK*** LS1 Longblock, T-56 Trans, 408 Iron Bare Block *CHEAP*, Exhaust/Headers!!! Heres what im selling.
Prices are firm, unless otherwise noted. Prices do not include shipping, as I would prefer you come and pick the stuff up.
First up....
Complete LS1 Longblock, minus throttle body, and intake. If you want the throttle body, and LS6 Intake, add an additional $450 to my price.
Motor has around 50k miles on it.
Motor, on dyno, made 430hp and 440tq.
Mods: PRC Stage 2.5 5.3L Cylinder heads, stock gaskets, stock head bolts.
Texas Speed MS3 cam, chrome moly pushrods, Comp Lifters, New timing chain. Pistons have been flycut, motor responded VERY well to a 150 shot wet. Motor had an issue that turned out to be a coilpack gone bad, and im selling it because I have already started my new motor build. On 150 shot, this motor, through a 6 speed and a dana 60 with 4.56 gears produced 589hp and 573tq
At the track, I ran NA 11.2 @ 117mph. no runs on the jug, but should def run in the 10's
Motor runs great, Mobil 1 synthetic was used in it, and eventually i switched over to royal purple.
PRICE: $2000 - SOLD
*$900 deposit required upfront, the rest required before motor ships or is picked up. this is to pay for the motor to be removed, NON-REFUNDABLE*
-------------------------------------------------------------------------
408 6.0L Iron Block
Block has been machined for a 408. O-Rings for blower/Turbo applications, Decked and Vatted. Previous owner ran this block for a little while. Cylinders need a finish hone and you are all set!
PRICE: $600 - SOLD!!!!
Pics Available.
------------------------------------------------------------------------
T-56 with 50k Miles.
Comes with RAM Powergrip HD Clutch, McLeod adjustable master, Steel Billet Flywheel, clutch pedal, wiring harness, shifter, short stick, and center console.
You must bring me your auto center console to complete this sale.
Will also accept built TH400 setups + cash. ($300) TH400 must come with convertor for LS1 (3200+ Stall is good) and a shifter with transbrake and tranny crossmember.
PRICE: $2,000 - SOLD
--------------------------------------------------------------------------
Stock WS6 Hood
Black in color, excellent condition. One rockchip. Hard to see unless you look for it. Pics available.
$750 - SOLD
-------------------------------------------------------------------------
LS1 Mac Mid headers & Gutted Cat Y-Pipe & SLP Loudmouth
$550 takes it all - SOLD
Video of my car when it had just a cam in it with this exhaust setup.
http://www.youtube.com/watch?v=BOQoUL2UQmM
this exhaust, stock cam, stock heads, with just a intake made over 390hp
Prices are firm, unless otherwise noted. Prices do not include shipping, as I would prefer you come and pick the stuff up.
First up....
Complete LS1 Longblock, minus throttle body, and intake. If you want the throttle body, and LS6 Intake, add an additional $450 to my price.
Motor has around 50k miles on it.
Motor, on dyno, made 430hp and 440tq.
Mods: PRC Stage 2.5 5.3L Cylinder heads, stock gaskets, stock head bolts.
Texas Speed MS3 cam, chrome moly pushrods, Comp Lifters, New timing chain. Pistons have been flycut, motor responded VERY well to a 150 shot wet. Motor had an issue that turned out to be a coilpack gone bad, and im selling it because I have already started my new motor build. On 150 shot, this motor, through a 6 speed and a dana 60 with 4.56 gears produced 589hp and 573tq
At the track, I ran NA 11.2 @ 117mph. no runs on the jug, but should def run in the 10's
Motor runs great, Mobil 1 synthetic was used in it, and eventually i switched over to royal purple.
PRICE: $2000 - SOLD
*$900 deposit required upfront, the rest required before motor ships or is picked up. this is to pay for the motor to be removed, NON-REFUNDABLE*
-------------------------------------------------------------------------
408 6.0L Iron Block
Block has been machined for a 408. O-Rings for blower/Turbo applications, Decked and Vatted. Previous owner ran this block for a little while. Cylinders need a finish hone and you are all set!
PRICE: $600 - SOLD!!!!
Pics Available.
------------------------------------------------------------------------
T-56 with 50k Miles.
Comes with RAM Powergrip HD Clutch, McLeod adjustable master, Steel Billet Flywheel, clutch pedal, wiring harness, shifter, short stick, and center console.
You must bring me your auto center console to complete this sale.
Will also accept built TH400 setups + cash. ($300) TH400 must come with convertor for LS1 (3200+ Stall is good) and a shifter with transbrake and tranny crossmember.
PRICE: $2,000 - SOLD
--------------------------------------------------------------------------
Stock WS6 Hood
Black in color, excellent condition. One rockchip. Hard to see unless you look for it. Pics available.
$750 - SOLD
-------------------------------------------------------------------------
LS1 Mac Mid headers & Gutted Cat Y-Pipe & SLP Loudmouth
$550 takes it all - SOLD
Video of my car when it had just a cam in it with this exhaust setup.
http://www.youtube.com/watch?v=BOQoUL2UQmM
this exhaust, stock cam, stock heads, with just a intake made over 390hp
Last edited by SMOKKINU; 10-15-2007 at 06:45 AM.
09-16-2007, 11:26 PM
#3
Launching!
iTrader: (13)
Join Date: May 2007
Location: Prunedale CA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
ttt for a killer deal, EXACTLY what im looking for!!! i just gotta wait another month for the rest of the $... DAMN! how many miles were on the motor when you did the h/c?
09-17-2007, 07:12 AM
#7
lets make some offers on the motor/trans
i will not part things out.... trans is sold as a package deal, you buy it all, not bits and pieces, unless you gather up some buyers and it all gets sold together.
If anybody finds me a buyer for the Longblock and the Transmission, I will give up a $100 finders fee to whoever helped me to sell either. If you find a buyer for both, you get $250
i will not part things out.... trans is sold as a package deal, you buy it all, not bits and pieces, unless you gather up some buyers and it all gets sold together.
If anybody finds me a buyer for the Longblock and the Transmission, I will give up a $100 finders fee to whoever helped me to sell either. If you find a buyer for both, you get $250
