FS-- almost every car thing i have...
#1
FS-- almost every car thing i have...
mmk, im parting out my camaro, garage, everything.. ask me for a price on stuff.
02 LS1 with 6spd... needs clutch and id rebuild the 6spd.. but the engine runs strong.. much stronger then it should.
has 224/228-114 cam with the good pre-sourcechange 918s and TSP pushrods. ASP pulley too. stock LS6 intake, etc... has about 75k on motor. borescope still shows factory fresh crosshatch.
engine could be sold with, or without accessories, with pulley or without, with cam, or with stock stuff... so PM me and SPECIFICY exactly what you want and expect and we'll work something out.
PAracing tubular Kmember and tubular A-arms... fits thirdgen Fbody and has mounts for the LS1. doesnt fit SBC, it fits the LS1. its black. -- SOLD!
LS1 to 90-92 camaro harness.. plug and play.
rearend - Moser 9" housing, Moser axles, Strange Nodular centersection, Detroit locker, 3.70 gears. torque arm mount has been milled slightly to align the torque arm better. can sell torque arm with it. has 'LT1' style PBR brakes on it.
torque arm.. Jegster adjustable... works great.
'drews' style T56 crossmember with 'humps' for exhaust clearance.
corbeau CR1 seats.. faded a bit, and cover is wearing thin on drivers side.. get them, put new covers on, have badass lightweight seats that boltin to your thirdgen or fourthgen... will come with the sliders and stuff.
Bogart rear rims.. 5 something, i forget the name at the moment... they're friggen LIGHT.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
NX single nozzle nitrous system... 10lb bottle, brackets, purge, nitrous filter, MSD windowswitch, etc... can be totally hidden. every line has a mist of flat black over it to make it less obvious.
thirdgen camaro ALUMINUM front bumper support, with holes holsawed into it for half the alum weight... it'll hold the nose up on your drag car at speed... i wouldnt count on it as a bumper, but its better then running nothing and cupping air. people leaned on the nose all the time, they never knew... it doesnt bend or anything like that.
thirdgen AC delete box. kinda rare to find.
OR, you can buy the 91 camaro convertible with all of the above.. its not apart yet.
the car itself has SFCs, new roof with GLASS rear window, power trunk, power door locks, power windows, etc... nice non-cracked dash, etc.
if you want it after i pull everything thats an option too... will have a stock TBI 305 in it when its sells.. can be a manual or an auto car. was factory auto, currently a manual.
i have a shitload of misc thirdgen parts. if you need a small worthless plastic thing thats almost impossible to find.. im probably hording one, incase i ever needed it.
LS1 mockup block.. its a stock block, with a hole in it.
98 LS1 heads.. used with the mockup block.
1stgen Gtech.. the radar detector looking one.. i never use it.
clear thirdgen hard plastic nose.... its a plastic nosebra for a camaro. a hard plastic clear nosebra.. kinda cool looking.
anything heavy, like the rear, LS1, etc.. im not shipping. im in charleston, SC, come get it. everything else.. you pay shipping...lol
oh, and i know i have more crap, im just tired of typing. lol.
02 LS1 with 6spd... needs clutch and id rebuild the 6spd.. but the engine runs strong.. much stronger then it should.
has 224/228-114 cam with the good pre-sourcechange 918s and TSP pushrods. ASP pulley too. stock LS6 intake, etc... has about 75k on motor. borescope still shows factory fresh crosshatch.
engine could be sold with, or without accessories, with pulley or without, with cam, or with stock stuff... so PM me and SPECIFICY exactly what you want and expect and we'll work something out.
LS1 to 90-92 camaro harness.. plug and play.
rearend - Moser 9" housing, Moser axles, Strange Nodular centersection, Detroit locker, 3.70 gears. torque arm mount has been milled slightly to align the torque arm better. can sell torque arm with it. has 'LT1' style PBR brakes on it.
torque arm.. Jegster adjustable... works great.
'drews' style T56 crossmember with 'humps' for exhaust clearance.
corbeau CR1 seats.. faded a bit, and cover is wearing thin on drivers side.. get them, put new covers on, have badass lightweight seats that boltin to your thirdgen or fourthgen... will come with the sliders and stuff.
Bogart rear rims.. 5 something, i forget the name at the moment... they're friggen LIGHT.
92 camaro parts car.. its been picked thru a little, but i'll sell it CHEAP. same as scrap value. lol.
NX single nozzle nitrous system... 10lb bottle, brackets, purge, nitrous filter, MSD windowswitch, etc... can be totally hidden. every line has a mist of flat black over it to make it less obvious.
thirdgen camaro ALUMINUM front bumper support, with holes holsawed into it for half the alum weight... it'll hold the nose up on your drag car at speed... i wouldnt count on it as a bumper, but its better then running nothing and cupping air. people leaned on the nose all the time, they never knew... it doesnt bend or anything like that.
thirdgen AC delete box. kinda rare to find.
OR, you can buy the 91 camaro convertible with all of the above.. its not apart yet.
the car itself has SFCs, new roof with GLASS rear window, power trunk, power door locks, power windows, etc... nice non-cracked dash, etc.
if you want it after i pull everything thats an option too... will have a stock TBI 305 in it when its sells.. can be a manual or an auto car. was factory auto, currently a manual.
i have a shitload of misc thirdgen parts. if you need a small worthless plastic thing thats almost impossible to find.. im probably hording one, incase i ever needed it.
LS1 mockup block.. its a stock block, with a hole in it.
98 LS1 heads.. used with the mockup block.
1stgen Gtech.. the radar detector looking one.. i never use it.
clear thirdgen hard plastic nose.... its a plastic nosebra for a camaro. a hard plastic clear nosebra.. kinda cool looking.
anything heavy, like the rear, LS1, etc.. im not shipping. im in charleston, SC, come get it. everything else.. you pay shipping...lol
oh, and i know i have more crap, im just tired of typing. lol.
Last edited by MrDude_1; 10-25-2007 at 01:09 PM. Reason: marking Kmember/a-arms as sold.
#5
$400 for all of it together.. i'll send ya the bolts with it too since they're such a PITA to find...
would you be able to pick it up from Charleston, SC? it is rust free, but it was also a drag car, and needs paint... i donno what a fair price is as a roller... ive never looked into it.. my current plan is to throw stock stuff back on, dump a TBI305 in there, and sell it as a running car. when you say roller, how much of the above listed stuff would you want on it?
would you be able to pick it up from Charleston, SC? it is rust free, but it was also a drag car, and needs paint... i donno what a fair price is as a roller... ive never looked into it.. my current plan is to throw stock stuff back on, dump a TBI305 in there, and sell it as a running car. when you say roller, how much of the above listed stuff would you want on it?
Trending Topics
#11
but because theres SOOOOOOO many ways to split apart what is basically the drivetrain and suspension of an entire car, just ask exactly what you want a price for, and i'll post it up in public... no secret squirrel **** here. LOL.
what would you like the price of?
#14
Want to seperate the 6 speed? I need a F-Body T56!
snyper10x@msn.com
snyper10x@msn.com
i have a local friend thats building a street rod... hes intrested in the engine, but not in the transmission.
all PMs replied to BTW.
#16
oh yea, i forgot...
i also have a BMR extreme drag bar with spohn bolt on brackets for the 9".. if someone wants it.
im reading/replying to PMs now. lol.
btw, for anyone reading.. theres now a 8person long list of people who want the bogarts.. so i dont need mroe PMs about them. lol.
i also have a BMR extreme drag bar with spohn bolt on brackets for the 9".. if someone wants it.
im reading/replying to PMs now. lol.
btw, for anyone reading.. theres now a 8person long list of people who want the bogarts.. so i dont need mroe PMs about them. lol.