LS2 454 short /ET265cc heads w/covers
#1
LS2 454 short /ET265cc heads w/covers
I think I'm finally going to bail on the racing game to start tournament bass fishing as my main hobby. I'm starting with the heart of the project, the engine/heads, and will sell off the EXTENSIVE list of parts after the engine sales. If there is no interest, it will go to ebay. Heads must sell with engine due to the pistons being custom made for them. Description as follows:
Short Block:
LS2 block dry sleeved by Steve at R.E.D.
4.150" bore
Lunati Pro billet custom cut 4.185" stroke crank
Callies Compstar 6.125" rods
Custom -13cc Wiesco pistons (reliefs cut for ET 265's)
ARP main bolt kit w/stock mains
11:8:1 compression with below heads
Built and put together by Erik Koenig at HKE.
Heads:
ET 11* 265cc
2.10" SS intake valves
1.60" SS exaust valves
.700" PSI 1225 hydraulic roller springs
Xceldyne light weight titanium retainer upgrade
Chamber opened by hand to 4.150" (66cc)
Rockers/covers:
Jesel J2K lightened Mohawk series rockers
ETP valve covers made for 265's / come with billet coil brackets
I've got $8k in the short and $5600 in the heads/rockers/covers. Everything is brand new. Engine is still in original factory bag and heads in original box with tape still covering deck. Will sale for $12k/you cover freight of the engine. Heads/rockers/covers will go UPS or USPS, your choice. Everything is avalible NOW. No telling how long you'd have to wait if you started to order this combo today. Buyer will get first choice of almost any part needed to finish the project at cost of said item. Pic below, intake not included, unless you have the dough.
Short Block:
LS2 block dry sleeved by Steve at R.E.D.
4.150" bore
Lunati Pro billet custom cut 4.185" stroke crank
Callies Compstar 6.125" rods
Custom -13cc Wiesco pistons (reliefs cut for ET 265's)
ARP main bolt kit w/stock mains
11:8:1 compression with below heads
Built and put together by Erik Koenig at HKE.
Heads:
ET 11* 265cc
2.10" SS intake valves
1.60" SS exaust valves
.700" PSI 1225 hydraulic roller springs
Xceldyne light weight titanium retainer upgrade
Chamber opened by hand to 4.150" (66cc)
Rockers/covers:
Jesel J2K lightened Mohawk series rockers
ETP valve covers made for 265's / come with billet coil brackets
I've got $8k in the short and $5600 in the heads/rockers/covers. Everything is brand new. Engine is still in original factory bag and heads in original box with tape still covering deck. Will sale for $12k/you cover freight of the engine. Heads/rockers/covers will go UPS or USPS, your choice. Everything is avalible NOW. No telling how long you'd have to wait if you started to order this combo today. Buyer will get first choice of almost any part needed to finish the project at cost of said item. Pic below, intake not included, unless you have the dough.
#2
Launching!
iTrader: (11)
Join Date: Nov 2006
Location: ORANGE COUNTY, CA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
shoooot...... what else do you have??? you wouldn't be up for trading for a 2003 28' Eliminator with 650hp would you??? you could drag a net across the water and catch em with that!!!
#3
That's one thing I would have absolutly no use for. As far as stuff I have, there's alot. Almost anything needed to finish out this motor, full suspension, drivetrain, fuel system, 02' SS with 10k miles that's been sitting in the garage for 4 years etc.... Once again, none of that is FS until the motor goes, after that, it's a open market.
Trending Topics
#12
10 Second Club
iTrader: (17)
I was looking forward to seeing it together and see how our 2 set ups compared.
It would have been cool to see a 454 SS with a 455 WS6 both packing the Harrop 55's together.
Good luck with the sale.
Hopefully some one will pick up the complete project and see it to completion.
It would have been cool to see a 454 SS with a 455 WS6 both packing the Harrop 55's together.
Good luck with the sale.
Hopefully some one will pick up the complete project and see it to completion.
#15
TECH Enthusiast
iTrader: (25)
Join Date: Nov 2001
Location: shreveport, Louisiana
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
damn jason I cant believe your selling out man, you are so close. it would have flown with that setup. Let me know if someone buys your motor I might take the car off your hands.