have a pair of 317 truck heads with only 60k miles on them, complete not taken apart Aluminum heads. Usually used for forced induction and can be ported to flow over 300cfm.
250 firm
6.0 truck intake complete with rails and injectors with 1 drive by wire tb and one cable tb also 60k miles. 80 firm sold

ONe top cover and pair of valve covers with front and rear cover also 50 firm sold

Pair of 02 sims for f-body 35 firm

I have two sets of truck exhust manifolds best used for front mount turbo set up 30 for a pair 1 pair sold

Every one hates tire kickers

I bought a whole 6.0 motor and only really want the block.

Have rods still on pistons also 30 sold

truck oil pan 25

truck coil packs once again all their on brackets 50. sold

good truck water pump 30 sold

4th gen f-body power steering pump with pully and bracket 50

and another set of iron 6.0 truck heads 82k complete 50

and two sets of rockers on bars 45 each.

 

Possibly interested in a set of the manifolds. Do they have the EGR fittings?

Also, my shop owner may be interested in the power steering pump, pulley and bracket.

Also, the valve covers and front and rear covers.

PM me a price on all that stuff shipped.

 

yes the manafolds have the egr fittings. shipping might be a bit if you want them as you know they are iron probbley 35lbs each.
100+ shipping, shipping would probbley be a good bit so i took 30 off those things to offset.

 

I am VERY interested in the covers and coils.
PM sent....

 

valley cover and valve covers and ignition coils... sold

 

Does the power steering pump have a good reservior and cap, any cracks or chips in the pulley. Do you have the bolts for bracket and pump? PM me.

 

Do you have a Crank

 

i have a crank but it needs turned. Did not spin a bearing or anything. would take 50+shipping for it. i was planning on keeping it but i have two so no big deal.

pretty sure i have the bolts from the bracket to the pump but not sure for the ones that go from bracket to head. pully is brand new from dealer nothing wrong with it.

 

how about the pistons?connecting rods?

 

yes have the pistons and connecting rods all good shape, was planning on rebuilding with new rings but if i sell the crank then i might as well sell them also. their the dished pistons out of an lq4 still on rods.

 

these are the 4" inch ones right? i only need 2 with rods, are you willing to sell?
if not, how much for all 8 with rods shipped to 78584

 

Any pics of the heads, have they been checked/tested?

 

the exhaust manifolds weigh in at 30lbs for the pair.

i've got a few sitting here

 

yea i weighed them later 15lbs each lighter then i thought. yes their the 4inch bore pistons. i would sell them all for 30+shipping.
power steering pump is probbley sold.

heads have not been checked, just pulled and setting here.

 

do they come with the rods bro??
i will take them,pm me your paypal info

 

yea they have rods

 

sounds good, let me know

 

what do you want for a set of manifolds shipped to 85710? do they have teh heat shields?

thanks

 

yes they have heat sheilds and i think i have new bolts also. what city are you in, as your zip and tucson doesnt come up on ups. but yes 30+shipping.

 

could you please check if you can overnight or 2day please