Forged 4.030 SRP pistons 32cc dish 0 miles
07-06-2008 | 09:01 PM
#1
Thread Starter
no title here
iTrader: (8)
Joined: Jun 2007
Posts: 2,272
Likes: 2
From: Montgomery, AL
Forged 4.030 SRP pistons 32cc dish 0 miles I am seriously thinking about giving up the turbo build and just bilding the car NA. These pistons were ordered from VA Speed and they have 0 miles on them, they were only installed in the motor. I would have to take the block to the machine shop to have them removed but that wouldn't be an issue and could have them out in just a few days and shipped. These were specd with my Dart heads that have a 62 CC chamber and the thinkness of the stock MLS gasket at .055 would yeild a CR of 8.7-1. Like I have said I think I am just going to go with a NA setup. These were in a 408 if that matter about the pin location with a 4 inch stroke. I paid over 600 for them I would like to get 500 obo for them plus shipping. These were the pistons that VA Speed told me to run with when I said that I wanted the best piston without breaking the bank. Thanks for the interest
07-24-2008 | 02:08 AM
#7
Im interested. But could i run these with a stock 6.0 crank and a stock 6.0 rod length? What would I have to bore out the stock 6.0 block to to fit these in it? Im very interested. What hp rating are they good for?
Trending Topics
07-24-2008 | 09:21 PM
#8
Thread Starter
no title here
iTrader: (8)
Joined: Jun 2007
Posts: 2,272
Likes: 2
From: Montgomery, AL
The pistons are for a stroker motor rod length 6.125 with a 4 inch stroke. I don't know if you are intersted still but you would need a stroker crank and rods and bore the motor .030 over
