Steering Linkage Removal Impossible!!!
#22
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
I just got the thing off... finally!! i used a dremel to grind down the flange on the rack and pinion a few millimeters and a socket slipped right in. used an 11mm on a 3/8" drive and didnt even have to use a cheater bar. Thanks for all the help
#29
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
yea i know... i was just confused why it wouldnt come off easy casue everyone I talke to told me it would take like 5 minutes... but everything else on the car was even easier to take off than people said
#31
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
yea it looks like that drivers side header will just slip right in there no with it off, but the passenger's side is another story lol but im going to wrap the headers and sides of the eingine bay with tape to prevent scratches
#32
I unbolted both engine mounts and raised the engine high enough to clear both sides and both headers went in from bottom using a lift, but I will say LT1 fbody header install is a nightmare compared to other cars ive done. I love long tube headers on a LT1 though its worth it.