enjoi355

iTrader: (3)

lol, sorry if im being impatient, im just really curious to know where exactly they are at because my 355 needs a new set for my cam... i emailed TFS about a month, month and a half ago and they said theyd be shipping in two weeks, i even proposed they make an ltx specific intake manifold, but i dont think they went for it, lol

1badzee

iTrader: (12)

Considering the stock manifold flows plenty out of the box, anyone creating an aftermarket LTx manifold would be pretty much wasting their time. The "big dogs" that require custom sheetmetal manifolds and whatnot will probably go to Wilson Manifolds, which is tested and proven. In any case, there aren't enough of those "big dogs" to justify a company researching and developing an aftermarket ltx manifold. It would be cool though

want297z

iTrader: (7)

I wouldn't mind seeing a little update either. Just to say we are here now, but we plan to try to get to here.

Advanced Induction

iTrader: (2)

Finishing up the first 21deg TFS based offering now. As soon as we can, we'll put up preliminary pricing & info for you guys.

Puck

iTrader: (17)

Very cool

My main build doesnt need heads anymore, but I have the last shortblock from the car awaiting a mild 355 rebuild and would love to step up from the ported stockers it has now .

enjoi355

iTrader: (3)

i emailed summit and they said

"Response (Zack) 08/04/2009 09:16 AM
TFS-30400008-CNC 1495.95 in stock

You can call 1-800-230-3030 to order. Thanks"

camar0corey

iTrader: (22)

Well yeah you can probably get them as cast right now. Actually if you plug that part number into their website, it still doesn't show them.

FLN-LCKY19

iTrader: (2)

Hey all, I just placed an order for the set and my order status page has a link to the part directly. Try this short cut and see if it works for you.

http://www.summitracing.com/parts/TFS-30400008-CNC/

Should be here Tuesday. I cant wait to top off my new 383!!

Steve

camar0corey

iTrader: (22)

Yep that one works.

enjoi355

iTrader: (3)

can you please take pics when you get them, i wanna see if they are semi cnc'd and how nice these heads are gonna look

Advanced Induction

iTrader: (2)

There are pictures of the minor cnc blending TFS will do to the as-cast head here.

FLN-LCKY19

iTrader: (2)

No, problem bud. They should be here by Wednesday. I sure do hope they look like the pics that AI has posted. I will post a few shots once they arrive to compare as shipped assemblies.

want297z

iTrader: (7)

Can you provide a before and after dyno of just the head change? Or is this more of a complete rebuild of the engine? Just wondering as I would like to see what the difference is in just these heads alone.

grn95t/a

iTrader: (10)

hey steve, glad to see your getting closer to being done with your build. mine is done and running, but needs to be tuned really really bad, lol!

enjoi355

iTrader: (3)

those pics were from when you guys got the "prototype", ive seen them but was wondering if they had changed from then to now, they are nice like that and hope they stay like that

TrickFlowTech

They are the same as you seen in the pics.

TravisMcGill2000

iTrader: (2)

have they released the flow numbers for the things yet?

FLN-LCKY19

iTrader: (2)

I couldn't tell you what the difference is. When I got the car it had a Jasper Reman that was putting out maybe 200hp tops (best guess). Took the top off for a Cam swap, head gasket and valve train update and saw that the cylinders and pistons were toast. That was a year and half ago. Now I have a 0.030 over 4-bolt with a cast eagle crank/rods and forged SRP pistons at 10.9:1 comp. Its got a comp cams XFI 280 cam, along with an all comp cams valve train, the new trick flow 21* heads, MSD opti, 30lb injectors and all new sensors and supporting parts. Once its all back together I'm planning to take it to a local shop for a dyno tune.

Im hoping to be a little better off than I was before the teardown. Got my fingers crossed.

Steve

FLN-LCKY19

iTrader: (2)

Hey all,
Just an update on the heads. They finally arrived.

Here are a few pics of what was in the box.

http://s302.photobucket.com/albums/n...uperman/Heads/

n2oblkz

iTrader: (1)

Since these heads are 21 degree heads, will the standard LT1 headers and intake work with them?