Im looking for low compression pistons+rods for an LT1 Turbo project
do you guys have any suggestions?
I'd like to get part numbers if available.
Thanx

 

this is what i would use these parts for the money

http://www.jegs.com/i/Sealed+Power/8...41F30/10002/-1

http://www.jegs.com/i/Scat/942/6570021/10002/-1

 

How many HP do these handle?

 

Don't know much about the speedpro pistons but the price looks pretty cheap. Remember you get what you pay for. Don't skimp on the pistons in a turbo car!!! Look into CP or JE pistons if I were you. Those rods would probably do. What are your goals?

 

I need something that can handle at least 800whp.

 

Well the 2 I mentioned are good choices, I'd probably get CPs, I wish I had but it's to late I got JEs with a -31cc dish. My CC chambers are prety big and my compression comes out to around 8.5:1 I did skimp on the rods and got generic brand 4340 H beams. I have a eagle 4340 crank. If I were to do it again I would have got the same crank but eagle or scat rods and CP pistons. But my engine is allready built!

 

where do i find those?
can you provide me with part numbers?
Thanx

 

call Wiseco direct and talk to Brian Nutter, they carry K1 Billet Rods for a great price and tons of piston configurations for the ltx guys now.